Thanks for the reply
The printer was working and printing
there were no error codes.
and this one has very low use
less than 500 banners
P
Type: Posts; User: Penvy
Thanks for the reply
The printer was working and printing
there were no error codes.
and this one has very low use
less than 500 banners
P
Guys,
I really need help on this big time
This W8400 has the latest firmware updates
And was printing ok
print heads are good!
The print head looks like it was not filling some of the...
Guys,
Please help me out
Wasting TONS of ink with this
Moved printer setting
removed ink carts
reinstall
goes thru fill ink cycle and stops in the middle every time on indicator
Even a sm hair dryer will work.
Just on the edges.
portable butane soldering pen used very carfuly
P
Hey Guys,
I did a LOT of reading up on how these screens keep failing
It is the conductive bond to the glass that breaks down.
The glass is very temp reactive with cold and hot.
After a time...
I have installed the correct Remote operators kit to get into the touch pad and service modes.
The Firey1 will print with the correct IP and so does the XP test print with the same IP.
All...
Thanks Guys
I will try this ASAP
P
Its a T1 v.1.1
How can I get that patch?
What is the easy way to install this patch?
I have the SS1 service or is it simpler I hope
Any time I deal with Canon its a Big deal but this...
Crap,
I should have thought of that.
Better that that why not if I remember right that Bios Batt is a 3v just like any other Bios Batt on a PC.
the T1 is just a crap PC anyway and that Batt...
Thanks TEC!
Will Do
But that screen just keeps me guessing on how it could get so out of "calibration" with the LCD
Then when left on for a while it works just fine.
Only thing I can think of...
OK another fun issue I have now that we just lived with is how to keep the C1 IP static.
Every time we seem to have to power down we have to start and get them to link
Heres the setup
XP pro...
on the new drum please change the seals with the new upgrade seals that do not put as much pressure.
Canon knew that the side seals were too hard on the drum surface and that would wear out the...
Thanks TEK
The Copier was left on all last night
I went to try it and it works now
WTF??
It just seems as if the calibration was all of a sudden out when the power was out.
I was just reading this set of posts
This cracks me up, I am laughing my ass off with this .
ok guys no sense in stating the facts,
But I did have fun reading this
P
That we can agree on ;) Great copy!
Dont think its the drum, even with the potential sensor on the drum.
Temp can have the effect on the drum surface after a few hundred ,
but thats extreme over...
Well folks, I am back again on this C1.
Copier runs just fine, everything is just peachy BUT................A NEW PROBLEM
only this time its the touch screen!!!! what else??
The Color LCD is...
HI there,
Its been a while folks but my 2 cents..............
I know this "wonderful" copier very well in the developer, image, issues
One thing I know for sure is those developers leak, mainly...
Thanks T
Thats the most I have Chatted with you ever!
Just a weird problem
Hey ...is there any setting in service mode?
I will look at that
P
Not that I can find, I am wondering if the Posterartist version is not new enough, but the printer driver should be for any print.
Like a PDF that is already in the correct size and color setup just...
Will do T
Thanks for you time.
You are a dedicated tech with a great attitude towards other tech's
You do not brow beat or chastise, you state the facts as best you can.
Thats why I am a member...
I did , and Dl ed them installed them and went to the driver properties,
found the color mode and still just to 2 selections.
This is something I must really be missing here
I have read all you...
Just confirmed again,
went to the canon site looked for driver update ,did that and still only
2 selections.................. color and monochrome
The poster artist version is 1.31.
where...
My guess is that I dont have the right driver,
IN COLOR MODE
all I see is
Color
Monochrome
Thats it for selection
There is no
Monochrome photo
Hey T,
I looked all over the w8400 driver for the Black only.
It has the color mode but only monochrome and color selections.
there is no Black only on the selections from Canon in the driver that...
Thanks T,
Roll vinyl Banner
We use the photo BK
MBK can be a problem and clog the print head if not used often.
Can be a print head killer @ $600 each MBK is not worth it.
I have the manual.
...