Just looking at all the Sharp simulations and I use a lot of them for troubleshooting problems like sim 1-2, 2-2, 3-2, 7-1, along with the ones that clear the codes. Also I use 22-40 and 41 for the...
Type: Posts; User: leew
Just looking at all the Sharp simulations and I use a lot of them for troubleshooting problems like sim 1-2, 2-2, 3-2, 7-1, along with the ones that clear the codes. Also I use 22-40 and 41 for the...
That is a Controller fan motor error. do you have a finisher on it? Some finishers for that model has no controller fan and you have to update firmware for the finisher to make it work.
Has anyone been able to set any non sharp products up with MICAS? and if so how did you go about it.
We are wanting to track all copiers and printers at a couple locations. Thanks for any help.
I would check with the customer that does not sound like a good sharp code.
Has anyone been using MICAS Agent from sharp? if so how are you using it, and what do you think of it? I have about 50 machines on it but I'm not getting reports on all of them. Just wondering what...
Looking for a quick reference list for PM Cycles for all the B&W and color SHARP copiers. Is there any thing out there that someone has made up. I have all the manuals that I could make up one on my...
Does any one know where you can get the crum chips for Sharp toners? The manuals says to replace crum for F2-67 errors but sharp does not offer the chips. So is there a place to get them from a other...
Found the problem it was the motor that drives the toner bottle it was slipping just enough to give the code. No problem after switching out the motor.
It was a used dv unit out of a working machine they had on site.
Keep get this code on 1 machine checked ground, toner mix (118), drum unit, even replaced dv unit no change. Firmware is upto date. starting to run out of things to check any other ideas out there.