C1100, c2235 code or it just destroys the belt before it even throws the code. 3.5 mil on machine
New ITB assembly
New 2nd transfer unit
New drums
New PRCB
New ITB drive assembly
New...
Type: Posts; User: andyf424
C1100, c2235 code or it just destroys the belt before it even throws the code. 3.5 mil on machine
New ITB assembly
New 2nd transfer unit
New drums
New PRCB
New ITB drive assembly
New...
um, yeah, just realized I responded to a 8 years old thread.....
Welcome aboard! I was recently informed that we just picked up 6 Riso's in a very demanding environment. They're sending me to Boston to get some training but I'm sure I'll need lots of help getting...
I have never found a real rhyme or reason to that adjustment, just have to fiddle with it. I've got some machines running -40 some running +50. Hard paper mode and 2nd press adjustment can help....
Probably have to enable CUPS first,
go to terminal
paste "cupsctl WebInterface=yes"
press enter
I've got my windows printer installation game down to a SCIENCE but macs, yuck.
So, the ticking sound seems to have gone away on its own. Konica sent me a new fuser, I'll hang on to it in case the ticking returns. I did find a bulletin with dipsw settings to shut off fuser...
Anybody else having problems with c658 c558 fusers ticking? I've got one and it sounds like a c552 fuser rotation sensor, remember how those fusers would tick out of the box.......
Just wondering...
Thanks for the info everyone, the customer did not want to believe me when I told her it wouldn't work. I showed her some of your responses and she took the hint. I've got them set up with a SMB...
I've got an old bizhub 200 with a customer that wants to scan to gmail. I'm not very familiar with this machine, it's a little before my time. I can't imagine this thing supporting TLS so I doubt...
I've got one doing it now, have we come to a consensus on what the "best" fix is?
paper dust collector was packed tight, they use Boise paper which seems to be pretty dusty in my experience.dis-assembled the registration rollers and lubricated, bushings looked good, no weird wear....
I've got a C552 with about 1mil on it that is skewing 8.5x11 paper intermittently out of trays 3-4. No jams on the management list and I'm unable to recreate it while I'm onsite. Feed tires and...
I'll give this a shot, thanks!
I have a library with 2 coin-op 364e MFP's used for copy only. Is there a way I can delete all the paper types except Plain or permanently lock in the copy mode settings so they can not be changed?...
The folks over at SSD are having me replace SD101 and the FSCB as a pair.
A2YUPPV300 is the solenoid
Try re-installing firmware?
It's part of the ru-509 color density sensor. i forgot how to shut that off. I'll look in to it later but check the manual for ru-509 color density and you should find it.
I accidentally swapped K and M dev units on a c7000 once. Couldn't figure out why my test patterns were so weird.....
I've got the exact problem right now on a c284e. Installed the mylar, tightened the spring but still acts up. Usually its the first page, clear the jam and it'll run for a bit. Let it sit for a while...
33785
C1070p fuser all ripped apart
Stopped right at the drum, paper is trying to wrap around the drum but the claws are stopping but its still jamming. Took the customers paper and tried to run their job on our showroom 1250 with 20k...
When in doubt, try tray 4, still jams though. I flipped the drum claw spring on the end of the shaft that actuates the drum so the claws were up at all times but it still jams.
I've got a 1250 doing this also, cleaned and rebuilt the separation claw assembly with new claws/springs, also set lead edge transfer to "value separation". Customer is running really flimsy paper...
blackcat, you saved my a$$ again.
Are they printing on thicker stock?