I am logged in via the web... and carnt seem to find it
Type: Posts; User: danielcooke
I am logged in via the web... and carnt seem to find it
Just wondering how you can get a machine to print in black and white when say the yellow toner is empty? can this be done on the 2300n? and how?
What models do these suit?
MX 2300n purple beast
nevermind... the mainboard was missing the ram modual E with stores the fax data... ahhh
where is the sd card located in these??
also I thought id add the fax memory is at 0% no idea why???
got a problem on a 2600n brown... fax memory is at 0% and it wont allow a fax to be sent... comes up with the error;
The memory becomes full.
The job was cancelled.
Wait for the other end of...
Question.
I've replaced a belt after it was chewed up into 50 small pieces... now the new belt sounds like it isn't turning.. How can this be checked?? I think that's why the old one is in...
Whats the difference in the toners? apart from the obvious size ect
What the pros and cons for these 2 machines?
I had to turn the belt so the cover slotted back in correctly... i feel a bit silly...
Hi bill
thanks its and old machine a tech costs more then I paid for it.. ive changed drums ect before on canon machines without problem.. ive noticed this machine is a little more complicated......
Do you have to run anything in simulation if you have pulled a drum or developer out?
how do I get into simulation mode??
Hi Ruben,
Im not a tech so simple talk may help... where are the sensors located? the copier was working fine... then its only done this as soon as I pulled the drum and developer unit out to look...
Hello
I Got this error l4-06 on another 2300n I bought it was working fine and I just pulled the magenta drum and developer out... looked at it... put it back in... turned the machine back on now...
where can I buy a sharp manuals?
new to this site...
im not a tech... just a tight ass aussie trying to save money by fixing my canon ir 2270 and sharp 2300n when they break!;)
Hello
Just looking at changing my developers... the machine is a 2300n done about 35k colour but they are around 3years old at a guess... how many years do they normally last? does the kits have...
How do I run a test print in colour? to work out why my colour prints arnt a good strong colour finish? can the toner be turned up to be brighter?
machine has done 51 000 black and 31 000 colour...
hello
I took out the fixing unit to replace the film then i forgot to plug the 3 wires back in... now everytime I turn my machine on I get this error e000001-0002 any ideas??
thanks
dan