Thank you for the reply.
Thought that the dev would be the same.
Will give it a go.
Brett
Type: Posts; User: Brett GS
Thank you for the reply.
Thought that the dev would be the same.
Will give it a go.
Brett
Hi all
I got a simple question
Is there any difference between say C8155 and C8035 developer material?
They have different part numbers but just checking if anyone have attempted this and if it...
Hi Blackcat
I would like to get it from you if offer still stands
I like keeping any helpful info at hand.
Hi
Cant really make out from the pictures.
Which one is what it should look like?
Are you using generic toners?
How do the half tones look at 255 and 120?
Hopper feeding toner?
Check tcr % for yellow under level history in state confirmation.
Think you mean C558?
The only e i know is a B458e/B558e/B658e.
The C659 is much the same as a C759.
They not too bad as a office machine but as soon as you start printing on thick stock you will...
That looks like mirror 3 that needs adjustment.
8 range has same problem, normally caused during transport.
If you can then check out the bulletin "abnormal image" for the 8 range.
Adjustment is...
Thanks for the replies.
Will give smtp2go a shot.
Strip and check the paper feed drive assy.
2 oneway gears and shaft that they run on can cause that.
I have replaced a few on 558's in the past.
Hi all
Anyone else been having scanning issues with office365 the past few weeks on older devices (eg:223/283/363/423)?
Sorry typo 4750i
Not sure about the function version, will check it out.
Evening all
Wierd problem.
We have a client who have a few 4750i's.
Today one of them when trying to add a new user (id snd print/user authentication) via the web browser the "new registration"...
Alan what rating fuses are you using?
Where you getting them from?
Looks like B920 glasd that slids into the ph.
The old B42's did that a few times too me and had to replace mfp boards.
Good day all
I have a stupid question.
Client has a B360i,C250i and C308.
Out of 4 users only 1 can scan.
The other 3 keeps giving server connection error.
I have tried useing pc name/host...
Check the black drum.
More then likely the charge unit has toner in it.
Good day all.
I have had 3 i range machines (4050i,c250i,300i) that for some reason i cant seem to export data (network settings,address book ect) too a flash drive.
Sw 72 hex 04 is set,f/w is up...
Had something almost the same on a c308 and c558 and both it was mirror 3 that needed slight adjustment with a allen key.
Hi all
Update
Thanks for all the input.
Tried all except feed unit (didn't have one on hand).
Turned out being faulty size detection sensors believe it or not.
After 2 and a half hours and...
Sorry forgot to mention the torque limiters,replaced both tray 1 and 2.
With try another feed unit and update on the progress.
Hi Allan
Yes it gets out the tray and stops at the conveyance roller.
Hi all
I have a c554e driving me crazy.
I am getting intermittent j12-01 (from tray 2) and the odd j99-01.
Lone behold after leaving the customer it happends again even after testing long runs....
Turned out being the ru blowing the fs control board.
Hi all
Sitting with an issue with a C364e.
The machine does not see/pickup the finisher (fs534).
I have changed the fs board,power supply and printer control board. The harness tests fine...