First off, ALL Kyocera manufactured MFP's / Printers have Postscript built in (KPDL) except for the really small b/w home office devices (MA2000w / PA2000w / PA2100w).
As far as drivers, the KX...
Type: Posts; User: CWP
First off, ALL Kyocera manufactured MFP's / Printers have Postscript built in (KPDL) except for the really small b/w home office devices (MA2000w / PA2000w / PA2100w).
As far as drivers, the KX...
Try the Kyocera Driver Distributor
You are seriously going to blast someone for a (valid) reply to a post almost 11 years ago? That's brilliant!
Typically yes, if the Macro is already on an SD card it should work without issue in the new machine. You just need to determine how the Macro is being called. If it is within the driver and you are...
You probably have a bad fan. I doubt that U906 clears the code any more than completely powering the machine off and then back on would on its own.
You probably meant C6900. The likely reason you see this with legal paper is that it is narrower (8.5 vs 11 lead edge). Try running letter size paper short edge feed and you will probably get the...
If you are saying that this sample is from a SINGLE sided original placed in the DP (Face up in the DP tray), then you may be able to adjust the DP scanning position through U068 to resolve the...
Definitely L margins, and because they are "FRPO" settings (Firmware RePrOgram) they will remain as set until changed or reset. A Windows print job will not reset or change them.
I would ask that you try adjusting print position with the L parm. It will move Windows formatted print data (as well as others). I have frequently used it for this very reason with the forms that...
You can adjust the print by using the FRPO "L" settings. Syntax is !R! FRPO L"X", VALUE; EXIT; L1 / L2 is top margin inches/100, L3/L4 left margin inches/100. Default should be something like...
That does look like a failed developing unit. In order to clean this up and make it stop you will need to remove the laser unit and clean the outside of the laser as well as the cavity in the machine...
Thanks much, no refresher needed.
All these years and I never realized that the laser heats the toner, now I'm really confused as to what the fixing unit and all that other stuff in there does; is all of that really needed? And I...
You are likely looking for U224 "Setting original panel display". Opening image is what will give you the startup screen. Instructions must be followed exactly; if you don't have the right image...
Save the following text to a file named "LTF1.MCR" and then drop the file into ICLINK as a Macro and build it to an SD card in the printer; this will store the macro permanently on the SC card. Make...
Are you using the original Kyocera barcode SD or are you trying to use a copy? Put the original barcode font card in the printer, power it on and then print the font list to see if the barcode fonts...
If you can help Gab maybe you can help me:
"Car wont go into gear, can anyone tell me where the problem is?"
Gab, you REALLY need to help people help you; I don't think you could provide less...
You should be able to upgrade the "old fashioned" way of downloading the firmware to a USB drive and powering the machine on with USB drive inserted in the machine's USB port.
Alex, it is contained in the firmware and should automatically install when you perform a firmware update with the SSD installed.
Parts manual shows it as:
302MS94051
PARTS DRIVE FEED ASSY SP
40ppm(A4),42ppm(Letter)(A)/40ppm(A4),42ppm(Letter)(AF)/
If it is a 9530dn printer then you would be able to capture print data directly from the machine, but it would require a CF card in the printer. The procedure is found in the Advance Operation guide...
Internet browser is turned off by default, so just don't turn it on. If you need to prevent Admin from turning it on then you would need to change the password, but if the administrator did not know...
That is correct and it is normal operation. It has to print in that fashion in order to output to the tray in correct order. Are you ever printing more than on physical page (1 page duplex)? The KX...
Check registration roller / clutch to make sure it is not sticking and driving continuously.
So why don't you isolate the issue 100% before going any further? With all the different opinions on this thread pointing to scanner, developing unit, etc. scan something to file (or USB) from the...