Search:

Type: Posts; User: deserttech99

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    6
    Views
    6,057

    Re: FN-21 Finisher problem

    That was it!! Machine is running!! You guys are the best!!!!
  2. Replies
    6
    Views
    6,057

    Re: FN-21 Finisher problem

    Thanks....I did try that, but then I got an F0-70 error. If I lift the guide back up and restart the machine, the F0-70 error goes away but then the "lower paper guide" message comes back
  3. Replies
    6
    Views
    6,057

    FN-21 Finisher problem

    Hey guys - working on an HP S975MFP [which is the same as a Sharp M7570]

    Unit was jamming at finisher exit. Cleared jams and cleaned rollers. After resetting jam condition, display constantly...
  4. HP M830Z cartridge release handle stuck / cannot remove cartridge

    The cartridge release lever on this machine is stuck. It will move into the locked position [up] but the cartridge will not drop down completely, thus giving a "cartridge not installed/seated" error....
  5. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    Turned out the issue was the printer. The Oki MB470 isn't that old but simply would not connect. Tried connecting to an older Brother machine and worked perfectly in seconds
  6. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    The IP address in the reply is 192.168.0.80....the printer.

    So the issue is with the PC. Need to figure out how to fix the PC.
  7. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    As I mentioned before, it worked with my previous laptop with Windows 7
    So yes, I know it's an issue with this netbook with Windows 10. But I need this netbook to work, that's what I'm trying to fix
  8. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    Well the update to this is I am still not getting anywhere.....

    Trying to direct connect with a patch cable to an Oki MB470 using an Acer netbook with Windows 10 [32bit]. I want to pull up the...
  9. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    yes
  10. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    Thanks.....i had tried those things too, but still won't work. Cannot even print a test page
  11. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    yes
  12. Re: Connect a laptop to a printer directly with ethernet cable using Windows 10

    I am using a standard patch cable. Tried rebooting the printer and the laptop both but no help. Getting both the green LED and the amber LED on both ends, so there's an issue of some sort i can't...
  13. Connect a laptop to a printer directly with ethernet cable using Windows 10

    Okay, so this is an easy thing to do generally using a laptop with Windows 7 in order to test a network card.

    But every time I try to do it with a Windows 10 laptop it won't connect

    This is the...
  14. Copystar CS65501 gets stuck in processing

    When making copies, will run a set of 20 or so just fine, feed in another set of 20 and it will get through a few copies and then sit and drive for a long time, with the display saying "processing"....
  15. Kyocera M6535 bypass grinding noise & jams

    Unit is in a dusty environment. Trays work fine but bypass makes grinding noise and jams. Tried to clean and lube as best as possible. Looks like significant tear down to access gears and such. Ideas?
  16. Replies
    4
    Views
    866

    [Jamming] Re: CS-3035 Bypass not working right

    My apologies......however since I've had the unit out several times and tried several things, I think we can safely rule out the possibility of not reassembling the unit correctly. Or to put it...
  17. Replies
    6
    Views
    3,283

    Re: brother mfc4750e offline

    go to the Brother USA website. Very easy to find and update
  18. Replies
    4
    Views
    866

    [Jamming] Re: CS-3035 Bypass not working right

    Thanks, but as I mentioned I replaced both clutches
  19. Replies
    4
    Views
    866

    [Jamming] CS-3035 Bypass not working right

    Problem I'm having is the lift cams keep rotating causing jams. When bypass is empty or when booting machine tray does not bottom out. Cam turns about 25% past bottoming out so tray is in contact...
  20. Re: CLJ CP4525 won't finish booting with new formatter

    Thanks for all the replies
    The prior service company was dealing with the 59.F0 issue and "couldn't resolve it" so they told the customer they needed to replace the formatter to get everything reset...
  21. Replies
    5
    Views
    1,624

    [Error Code] Re: Copystar CS4500i - weird fax problem

    Sorry for the delayed reply

    TCook and Blackcat were spot on. In order to print received faxes one tray at least needs to be set to Auto. Weird but true

    Also, unit kept displaying statement size...
  22. CLJ CP4525 won't finish booting with new formatter

    With new [refurb] formatter unit will not complete boot. Hangs at [6/6 A/F]
    Has HP wireless print server and internal thumb drive installed. If I put the old formatter back in it works fine. The...
  23. Replies
    5
    Views
    1,624

    [Error Code] Copystar CS4500i - weird fax problem

    https://lh3.googleusercontent.com/p8bvF9N6Bu-11JlSJ1zFZ06rcn6-HUybiKiuTp_Uj9iseT4U06WuhBkKcruK2U9hfASac1DRWqckOY07xAHPhWcXAwCE4CqH_bFbGccpbNHLPLkjuutYE0b74De7DgDdYOv43kpIpJ1mYEi2QU9uMccO1nYJptBEamLGPQ...
  24. Copystar CS4500i display keeps going out

    User called on Monday saying the display wasn't working. Keypad was fine but none of the buttons responded on the display itself. Replaced the display & keypad with a working one and all was good....
  25. Re: Kyocera C2626mfp - Keeps saying toner not inserted correctly

    Do you have a part number on this?
Results 1 to 25 of 33
Page 1 of 2 1 2