Search:

one of our customers called in and says that the machine is in a constant state of calibration. it just keeps cycling and calibrating. anybody seen this happen before? just a direction to look , any...

we have several of these boxes out, but, one in particular we have installed 3 drive units so far. just wondering if any else has a similiar issue with these boxes and if so have you come up with a...

Our company bought a few of these off lease. Most are working using compatable toners, but, we have one or two out that are not working with these toners. I saw a post that if firmware was v45 that...

Thank you Hans. Replaced that solenoid with one from a 2590. Works like a champ. The input from everyone was much appreciated.

customer brought this machine in with regristration problem. image shifts 1/2" down the page. we have no reference materials for these boxes. looks like the paper has no stop at the registration....

thanks avskrap, took whole retraction assembly from parts machine and swapped w/bad one. so far it's working fine.

customer called w/c3101 code on this box. fuser drive assembly was recently replaced. short of replacing this assembly again, anything else we might look at for a cause of this?

sorry it took so long to get back. Anyway the problem turned to be that the previous users had a df-75 hooked up and the person we bought it from had failed to remove the circuit board that goes with...

Company bought a km-5035 off a lease. brought it in and is running great. Installed an fn-73 and the copier doesn't acknowledge that the finisher is even plugged into it. pulled back cover and...

Thank you, Akitu. Is there anything that needs to be done besides resetting drum and developer counts? Again thank you very much for the response. Happy Holidays! rb12

Customer called in and says she has icon of a man and a gear on screen. We don't normally work on sharp and are wondering what we need inthe way of supplies to perform maintenance on this unit. Have...

I have a samsung scx 6345 that will not power up, it as power coming in, red light on main board comes on but nothing else.

Many thanks to all who replied. turned to be the tray setting. i appreciate all the feedback. rb

Jams frpm tray 1 when running more than 1 copy. first copy does not exit fuser and 2nd copy has no image just a line across page. have tried cleaning feed clutch with no results. We are new to these...

customer called and says that she gets fuser error whenever the machine comes out of sleep mode. on/off gets it going again. any suggestions? TIA rb

sorry, too early in the morning. the machine will not copy. customer says they had a a power outage.

customer called that her machine will print from her computer, but will copy. anyone seen this problem? any help would be greatly appreciated. rb

replaced fuser drive gear that was broken. now getting A1 as soon as i put original in sdf. don't normally work on theses boxes. just trying to help a friend out. any help would be greatly...

Part# 129H-4580 looking for any of these in surplus at a reasonable price. PM w/price. tia

turned out to be faulty exit sensor. replaced sensor and all is good for now. appreciate all feedback. rb

got a call to look at this machine for paper jams. paper feeds into fuser about 2 and 1/2 inches and stops feeding. checked gear train and everything looks good. going to replace fuser, but was...

toshibatech, i really appreciate the detailed reply. Yes, I am a tech for 12 years mostly focused on konica minolta and nec. thanks a lot and maybe, i can give youy some help later. Thanks again. rb12

can anybody send the procedure for installing a developer kit and drum in this unit? we are nec dealers that have a customer that wants us to do a pm on this box. any help would be much appreciated....

Looking for a drawer base for a konica minolta bh-250/350.

are any simulations to check lamp? tried to make a "sky" shot lamp just flickered. no image on the drum. paper stopped same place