Yes you are right slimslob Ricoh has changed....
Type: Posts; User: 3bok3bok68
Yes you are right slimslob Ricoh has changed....
Hi guys someone can help me how to access SP mode for MP2014AD thanks in advance..
thanks zeldaman i will try to change the IOB board.
Hi nkot,
automatically reset the counter of waste toner bottle once you replaced new once you don't need to reset.
thanks for your advise
Hi
Good Day!
i have 2 machine with the same issue showing waste toner bottle is full even we change 2 times new waste toner bottle also change the sensor, thus anyone experience this issue...
disconnect the harness of HDD and power cable then switch on the machine if the machine goes to ready state there might be a HDD problem format HDD then see the situation.....
Hi Guys,
thus anyone has experience SC547-03 on MPC 2003ZSP replaced AC and DC power supply but not success.
please advise thanks in advance.
ok gift i wil do...thanks...
[QUOTE=ruben;450012]You need to replace the BCU and Polygon motor as a pair, if you don't you destroy the BCU and need to replace it AGAIN.[/QUOT
Thanks for reply Ruben, as you said I need to...
Hello,
I have Gestetner MP C5000 the display is totally black only O/P switch lights on, replace operation panel assy. same issue, in the WIM its showing SC202 immediately replaced lazer optic...
yes both tray is same issue...
yup slimslob both paper i am using same issue...
yup sandmanmac, but sorry to tell you I'am not in Manila, I'm here in Qatar...
Hello, I have a new MP 7502SP newly installed only 4k copies made customer ask service, when they using duplex on A3 paper contineously after 7 or 8 copies jam at duplex unit (J023), pull-out duplex...
Access SP mode then turn off and on main switch..
Lupi tama ka!!! Hehehe
No rsyarcia I can't access sp mode...thanks...
There is no fax option installed in the machine slimslob...
Hi slimslob I did disconnect and re-connect the harness of operation panel, ipu and controller but no success. Turning off and on the main switch immediately SC672 appear. Also I did putting back old...
Yes i am using original HDD only controller board I been changed....if the serial numbers doesn't match SC995 will appear. I have check SP 5811 and compare it rear cover where is the serial number...
Hi I have machine Gestetner MP C2551 error code SC672 controller faulty, moving nvram, sd card and memory put it in the new controller board, after changing controller board there is a message in...
Yes! All voltage are okey. The cannibalized machine I already installed in the customer its work fine! I experience this problem many times only disconnect the HDD its work.
Athlontini I take BCU from new machine and test it in the machine which have a problem but still same until all parts of the machine I canivalized transfer in the machine no success..
Try disconnect ARDF cable then test the operation.
Hi HP nope i did not see that TB 013, if you dont mind can you please send to me you said TB? thanks.