Hi, i have trouble scanning mixed originals on bizhub c558 with dual scan feeder. Originals are only A4 and A3 size but some of A4 became A3 size when scan, need help.Tnx
Type: Posts; User: tonerspot
Hi, i have trouble scanning mixed originals on bizhub c558 with dual scan feeder. Originals are only A4 and A3 size but some of A4 became A3 size when scan, need help.Tnx
Hi, i need some help , new customer call , first picture is fiery startup, second is a test no:19 from diag.Drum swap no effect, dev unit work fine on dc 252, any help? Thanks 5358953590
Same code again, i will order new belt.:(
I was updated today, will see what next.Thanks for all.
One year mashine arround 50k start to pop up code every morning,clear with front door not possible, only when take out belt unit and manual rotating gear can clear code. Cluch on fuser drive is...
Error on startup, anyone with similar problem?
New head, problem remain,swaped ribbon cables same , ollready ordered new pca carriage board. Tnx
My plotter stuck on "reseat GPK" printhead, i suspect carriage PCA or inkhead ribbon cable, but i can not find part number of that ribbon, any help? Tnx.
Thanks, I'll try it .
Dds is enabled, scan to net is not present, the system is with color scan and HFT controller, scan awas work fine both color and bw with accxes retrieval tool but now... Tnx
The system is with color scan and Hft conroler, we checked evryting on the seller was ok, scan both color and black, with accxes retrieval tool but now...Scan to net is not present. Tnx
Attemted to scan ,but" scan mode disabled ,networking services not enabled" error. I have ping, web pmt,print. Any advice? Tnx
check developer roller, you have too fat "brush" on one side.
Many thanks:)
Can anybody help mi with PN of fusing drive unit, tnx.
Check the exit rollers, clean, and you can put more presure on the spring of passive one.
Developer is diferent.
You can but bottle is different.
I've tried new cartr, nwram reset,firmware update,belt sensors clean, no change. Calibration end with no error, even with belt sensors unpluged from main board! Any help? Tnx.
Check PM
Check anti- spill blade.
http://www.copytechnet.com/forums/connectivity/17098-fiery-password-retrieval-tool.html
I am looking for this spare part,PN 105E17680 ,if any have and like to sell it. Tnx
With RADF disconnected same code, with lifted up RADF on power up no code,fully operational, can be a printer control board?
sc00-00 error on power up, i can not find on sm, any help? Tnx