Since you transported the machine, you would want to know the strength of the electric current in the new location.
Type: Posts; User: Andyboachie
Since you transported the machine, you would want to know the strength of the electric current in the new location.
From your comment: "In Service Menu under I/O P-Sensors DCON on P021 you can't tell a difference despite the cable being unplugged. Even when the sensors are activated, nothing changes here. Can it...
From the detail you've given ( "bypass tray with the paper in the R position and it didn't jam";
"letter size paper in drawer 1 to the R direction, and it didn't jam"), I presume any R-position in...
Checked out sticky clutch?
Unless a problem with the DC board, I would check the seating position of the sensor, connector to the sensor, any foreign material that may cheat on the sensor, a disengaged spring. Physically...
Thank you for the response Bro.
The power button works. But most of the time, it comes when the main switch from the wall is turned on. At that point, you will only see the blinking ink system...
Hello guys,
I needed to work on an HP Photosmart C6280 after a lot of ink spilled into the inner part. I had to even remove the print head and clean because of the nature of the spill.
However...
I'm so grateful. I will check that and see what happens.
Hello,
A customer called me and told me that his IR C3080 screen showed a dark screen instead of getting ready for work. Upon checking I saw that the progress bar starts but does not move further....
Hello,
I think the answer to everyone of your question is what the seller told you: "change the print head". Your post shows that you haven't changed it, but you were trying a miracle to keep it...
I think a sample image of the printout could give a better clue to members.
it looks like failure in the HDD connection or the HDD itself. Press *28* (Press 2 and 8 together)--COPIER--DISPLAY--ERROR. Among the history of errors, you'll find the most recent on top. Tap on it...
What is the situation of the cleaning web and the upper fixing roller? Expect this output if the web is dirty or not cleaning. The fact that the problem occurs at the trailing part of the copy seems...
Newness may not guarantee quality. I bet you it is pressure roller issue. There is uneven pressure distribution between the rollers. You may try the other suggestions.
Hello,
It likely has to do with the pressure roller. Have you tried fixing the old one back? What was the result? If the paper did not crease with the old one, it then has to do with the quality of...
My suggestion is that you should change the hopper unit and replace with another working one. It will likely be the same problem that was preventing you from bringing the toner bottle out. "... an...
It mostly don't. There is a marker signal (white rectangular area) at the end of the sleeve. If within six seconds of turning on the power, the sensor does not detect it, that is when it throws the...
It seems to me the drum is turning alright, but the fixing film is not moving freely around the heating unit. Remove the fixing unit and try a manual turn on a controlling gear to see if the film...
Hello,
Too bad about the seeming breakage in the picture! However, I still think you can bring the toner bottle out.
There is a large gear around the neck of the hopper unit. On this gear, there is...
Two principles that always work with dismantling and coupling a machine is: You always have to start coupling from the last area of dismantling, and You always have to finish tackling the areas you...
Hello Guys,
I'm so grateful for the useful comments you made. Yes I'm copier tech for 21 years. It just occurred as a faulty board on the Black/Cyan laser. There was a break behind the port housing...
I think it all comes back to what venom said. You need to manually gain access to the toner before you find out what other solutions lie ahead. Another way you can find out is to remove the silver...
Hello,
I worked on an Ir5045. It was bringing clean copies, just that it was due for servicing. After I did a very thorough cleaning, The copy for both printing and copying appear with cyan...
Hello Guys,
I have this situation of a shift towards the left margin. I have attached a copy of the original as well as the copy with the problem. I really don't know the cause. Because I only...
Hello Friends,
I finally could solve the tilt issue on the IRADV 5045 yesterday. I needed to replace the fixing unit to correct the error.
As before, I'm grateful for your efforts in making...