290802908129082
PJ2 should give 24v dc
Type: Posts; User: susanta_gaan
290802908129082
PJ2 should give 24v dc
Thank u sir for ur prompt reply, I'll let u know about shorting or dryness of o/p capacitor. Regarding motor code, i was not getting such code during normal operation but the control pannel display...
can anybody provide any idea to repair DCPU of bizhub c550. What is the voltage at PJ2?
I have KM bizhub c550 which becomes dead after no light at Control panel . i am presenting the list of steps taken
1.Checked power voltage supplied across PJ1DCPU-1 and 2 on DCPU and i found...
problem solved
Thanks for ur reply.
There is no error message, network cable is not connected and the progress bar is 1/3rd of its way. Still the problem persists.
Hi everybody, my machine xerox wc 7232 do not get ready. During start the UI display shows "please wait ...." and the progress bar indicator halts at the half way. Any kind of help is highly...
Pl. write the procedure, we will try to do. Thanks
No, It is the location of error on my machine.
thanks for ur reply. I have above said SM and Theory of operation for c550. They have only a standard sensor check data which may not be compared with my machine data. Any sensor check data of c55o...
Can any body upload the sensor check data of c550 working machine(without FS & LCT) because my machine shows misfeed detection during TURN ON my machine. Ant help will highly appreciated.
Jam code is 2001, I am attaching the pic for my machine. In my machine no FS nothing additional is connected to my machine. only the main body.
Hi,
I need system software for canon IR 3530.Thank u All
There is hexagonal rotating mirror inside the laser unit by cleaning with a dry cloth the problem is solved.
Problem solved .
yes it is evenly coated.
Where is the cd unit lock rod? Can u show with pcture, thanks.
it is both (copy and print)
Dear sir, My machine ir3530 produces light copy at edge (operator side) in both print and copy mode. Print and copy quality in A4R is perfect but while in A4 problem starts. i have done some initial...
Noe i have sst ver4.22e. need firmware for ir3570. Any help will be highly appreciated.
Sir, N bootrom taken from a working machine. It is ir3570.HDD is new one.Boot rom connected to its proper slot in main controller. Still the problem with 1/8 progress bar
can u please give me the procedure and necessary software required.
Sir,
1) yes it's DIMM (2) X 256mb connected to two different slot.
2) HDD is model specific with working firmware preinstalled when i brought.
3) It is a N-bootrom.
Can u please suggest me...
Dear sir,
As instructed by u I had installed printer bootrom, a new hdd and RAM is expanded to 2X256MB. Start the machine display screen shows with hdd downloading completed on the machine....
Can we use canon ir3570 as a printer without HDD. If yes what are the modification required because my m/c is not showing report setting to print the configuration page. My m/c is with one SDRAM, One...