Search:

Thanks for the suggestions.

I've had the loose metal plate on several machines. Fixed it with selotape.

I'll have a look at those feet and try adjusting the metal plate and let you know.
...

Hi 4real,

Sorry - Shim between 2 trays???

It only has one tray. strangely called tray 2, tray 1 is the bypass on the side.

Are you thinking of a different machine?

Koni

Hi Guys,

I have loads of these little machines and have the same problem on 5 of them. It jams from tray 2 and doesn't usually get out of
the tray when it jams. Only jams every 40-50 pages. I...

Guy's is it just me or is the search function on this site shit?

Al.

Hi Des,

Haven't had this problem before, but I can give you what it says in the manual.

F52-2

(7145/7235)

FM2 (Fixing cooling fan /1) abnormality

Hey Zalim,

Before sending the document to print, select printer properties and select the quality tab,
set the colour setting to CAD, set the pattern setting to FINE and set the image compression...

Shut yer piehole minime!

check the earth connectors for the drum and the main charge

Take out the laser unit.

Open it up by taking off the steel plate at the top (4 screws)

Clean all sides of the polygon mirror.

Put it all back together.

If that doesn't work then change...

Hi guys,

I'm a former HP tech now a Konica Minolta tech, looking for
help with a CP 1215 colour laser jamming in the tray.

I cleaned the feeds etc... but I checked and the rollers are not ...

Michael,

I'm not 100% as to how to enter the subcode. Do I hold down 08 then switch on and type 824 then press enter. Then enter the
subcode and press enter again?

Alan

Hi Guys,

I haven't worked on a Tosh since the days of the BD7815, so I'm a little rusty on these.
I have a 281C with a CF20 error. The machine will warm up and I can copy and print in
Black...

Hi Pete,

Very farmiliar with it. Was the First thing I tried.

Al

Hi Teqorious,

I am assuming when you say "on one side of the paper" that you mean that the problem is either on the page at the front of the machine or at the back of the machine when it exits...

I haven't seen this code and cant find it, but it's probably a
Failed MFBS and/or MEMS.

First upgrade the firmware to the latest version.

Then check if DHCP is being used when
the...

I think the reason that you can see it on the IU's and the Transfer belt is that it hasn't transfered properly to the belt. For all your IU's or laser's to be presenting the same problem is lottery...

I've never noticed that one. But I'll print it off and see how it comes out. But to honest it's mostly skin tones, (Hands and Faces that seem to be affected). It reminds me of similar images printed...

I don't have a postable sample. Will try to get one when I go out again.

I am getting no P codes and colour reg is perfect.

It's sounds very weird. I would take a look at the secondary transfer if it is only happening with heavy stock. I would also the transfer cleaning blade assy. and check your laser unit is clean or...

Have you checked the machine with a spirit level?

Hi All,

I have a C250 and when I print a picture containing a face. It looks as though their face is morphing into Max Headroom. (only slightly but very noticeable). For those of you not old...

You need to adjust the APS (automatic paper selection settings) and the ATS (automatic tray selection settings).

Don't ask me how it's done. It's been a long time since I've done it. But I know...

F26-03 Error

The toner density sensor (TDS) has failed to detect ripple output of 0.5 volts.

You have many areas this could be in, but it most likely to be the TDS sensor if you have already...

Hi wcody,

What is the DV?

Is it the Developer?

K.

Hi Guys,

I have a HP 5500 that is taking 3 minutes to print anything with a picture. I have replaced the Jet Direct and loaded it up with as much RAM as it will take, but it still takes 3 minutes...