Search:

If you had a kink in the hose, chances are that the toner clogged up inside the hose. Clean or replace the hose for the affected unit. I had one several months ago with a bad toner 'pump' in the...

Just want to update this with the solution. I pulled the interface on the plotter and reseated all the connections. Reboot both plotter and computer and the add toner message in Plotbase went away...

I don't know where I would find this.. the plotter has no printer log nor printer button. All of that is in the Plotbase software and I have deleted all jobs from the queue. Please advise.
Thanks

First the basics...Ricoh RW480 running Plotbase 3.5.
The plotter is functioning perfectly I can copy and it is scanning through ScanRouter to the network. When attempting to print it fails.
The...

Great. :mad: Post the Factory mode in the Open Forum. Are you nutz????

I agree with Shadow1 on all points with one addition..


listscriber....does the machine ever ASK for toner? If not, is there toner in the 'toilet bowl' at the front of the hopper unit? If not...

link here:

http://support.aficio.com/bb/pub_e/dr_ut_e/0001016/0001016737/V2060/z02671L8.exe

See this post....http://www.copytechnet.com/forums/ri...html#post63822

the goose guide for Jam code 17 says 'Replace Relay roller spring clutch (D0391166)'

that being said...I had one where I had to change the sp for the for the tray lift motor reverse. I don't...

Here ya go....

You use OEM parts but what about the toner? OEM as well? After market toner will gunk up your hot roller as well.

There was no upgrade released by Ricoh to change a 60 ppm to a 75 ppm. If the customer wanted 75 ppm that is what was sold to them. That is just the way it is and probably always will be. In fact...

Luv your answer! ;)

Have the IT twat create an account for the mfp with limited rights to the domain. Access the shared folder is all that is needed.

No problem apache_cat...I have trouble sometimes remembering which ones support SMB.

Unfortunately I have a few customers that refuse to let go of their old 1060/1075. Can't blame one...

No, it's done like this: Turn on the Delivery Server in User Tools/Admin/File Transfer. :D

You might try doing the laser pitch adjustment...the machine prints in 600 dpi and copies in 400 dpi. Just a thought.

Good Luck.

So you formatted the system SD card from the machine??? :eek: Those cards are copyrighted and created in a proprietary format in the factory to prevent copying. They have files on them that can't be...

Same here in sunny California...it's a pain the first time but you'll get used to it. :rolleyes:

Yes you can...secret link they never deleted it just deleted the link to it...

http://support.aficio.com/bb/pub_e/d...0/z02671L8.exe

Read this and the attached files...

http://www.copytechnet.com/forums/ricoh-savin-gestetner/18323-help-scanning-ricoh-1022-2027s.html#post63826

Open port 3670 tcp in the firewall on the...

The 1075 does NOT scan SMB to folders...Twain or Scanrouter only!
You may still be able to get SR Lite through this link:
...

Been quite a while since I worked on one of these..used to have a few of those beasts. The old memory isn't what it used to be but... Usually I found that code being caused by the Potential Sensor...

:rolleyes: Post your credit card info and your bank routing number. Then I'm sure someone will offer up the info you seek. :rolleyes::rolleyes::rolleyes::rolleyes:

I know a very good and reasonably priced dealer in your area...check your PM

Chances are its not going to work. The machines that use the pcmcia card only recognize a 4MB card...at least that's what Ricoh told us in training. I was lucky enough to go to training way back...

Have you tried this? See attached....

Also if you are printing from AutoCad or similar there may be some settings you need to set there. The Software will ALWAYS over ride the printer settings.