check the low voltage power supply see if number 1. the two capacitors have blown the top open also check the 2 fuses below the capacitors.
they are all available in electronic stores .i have...
Type: Posts; User: blsquires
check the low voltage power supply see if number 1. the two capacitors have blown the top open also check the 2 fuses below the capacitors.
they are all available in electronic stores .i have...
just to wish you all a merry Christmas and a happy new year to you and your families
this worked on the old color machines.turn off machine ,remove all toners then turn on machine, when its ready to print turn off again then put all toners back in and see if they all register.
try this go into 671
then go to fax dimm clear then go to recovery fax dimm that may solve your problem
just a suggestion,try adding another printer using the second one for printing to the copier and name it differently so anyone who wants to print to the printer can select it and if they want to...
fit a new code dimm and update firmware
this should solve your problem
the hard drives are not a problem just swap them with any hdd and do a chkdisc.i never use the part as they are too dear.
as for the ram memory if it is a CODE memory it wont boot boot up with any ...
check the power supply pwb and see if the two large capacitors are bent at the top.i have been replacing a lot of these faulty caps.they are available from any electronic store and only cost about...
you may find 004 in service mode will get you out of trouble
i wish you all a very merry christmas and a happy new year :)
my answer to this question is yes.i also believe in father christmas and rudolph the rednosed reindeer
no just Admin Admin
Admin
and Admin
thanks for your help our kyocera rep sent what he called a new power supply (it was a relay pwb)we fitted a new power supply and the old one had a popped cap after fitting the new power supply no...
thanks for your help our kyocera rep sent what he called a new power supply (it was a relay pwb)we fitted a new power supply and the old one had a popped cap after fitting the new power supply no...
this machine has a mind of its own if you do a copy it locks up all the pcs on the net work .we have changed main pwb and the power supply pwb .
no difference to make it even stranger it happens...
just a point .we had a customer who was told save your empty black toner bottles and use them for waste bottles.good idea BUT the customer was replacing the waste bottle before the machine told them...
See Kacey Musgraves and Willie Nelson's Haunting 'Are You Sure' Video - Rolling Stone
hope you like it
we are a kyocera dealer and we have machines in many schools.they use the machines to print year books and school information books .
they use card fed through the bypass .apart from extra wear on...
just to wish everyone a merry christmas and a happy new year
i travel on the freeway to work everyday at 100km per hour.the only thing that used to worry me were the tailgaters.
then i found a cure,i went into the auto electricians and got them to fit a push...
when you push the booklet folder in there are two pins that the folder locks in on .open the booklet folder and bend them back bend them back (toward the machine)just a little bit .
hope this helps
help this printer is driving me crazy.it wll print a4 duplex no problem the customer uses a5 duplex to print booklets the most it will do without jamming is 3 pages
the jam occurs on side two...
we had the same problem also with cyan, changed drum and dev unit still the same so we had a close look at the transfer belt.
on the belt toward the back of the machine there are four metal plates...
oops took out the fuser to check it for noise at the customers and pulled out the ribbon cables for the adf.now it is in the work shop .first there was no display only the back light .
now it is...