Search:

Hey guys. How do you reregister a machine? The remote services is on but is offline and i everything is greyed out soni cant make any changes. The machine is actually online and dns settings Re...

I replaced both ros and the mob sensor. I get all 0 on the one registration setup and ng on another. I forgot which one. Cyan is way off and yellow is also 38305i swapped the drums but it had no...

Nevermind. Hcf feed issue. More than likely check sensor is bad

This code doesn’t seem to exist. Any help would be appreciated

What did you find? What fixed it?

091-317 and 091-603 does not exist in the book?

We have perfect stripes only on black out side the image area on the transfer belt and always only showing up on the edge when you have a big...

Cyclone motor seems to spin fine. filter was a bit clogged. I have ordered the filter and trying to find the cyclone motor seals. Any ideas what else might be causing this code to happen? Where can I...

i have hard drive part number JC59-00035A

I need the firmware please PM

I HAVE A X4250LX THAT HAD A S1-2433 ERROR. COULD NOT GET MACHINE TO BOOT. OR RECOVER.
I installed a 320 gig hard drive but could not get it to format, or the other 2. log data and something else....

Thanks for the reply !!! Yea... We figured that out when my head tech actually read the words " you can not use a sata drive to replace an ADI. Apparently I clicked on the main hard drive replacement...

Installed a 320 gig hard drive. In 4c it shows as a sata hdd and not an Adi hdd.
Was able to update system and engine software but could not for the life of me!! :)
load hard drive software. This...

thanks!! Yea. For some reason on every 75xx 010-006 doesn't work. Why is that? 010-001 will. And that's on functioning machines. Typo?

yea. We have the right fuser. Trying another one here in about and hour. Then I'm going to try the itb clutch assembly. I don't see how that little guy could cause so much trouble bogging down the...

Any more info about the pot? I'd like to turn that little sucker and see if it works.

Gonna try the itb retract clutch next

Well what fixed it?

Kinda having a 310.330 epidemic. Changed the fuser , transfer assembly and motor. Still sounds like it's bogging down then codes out. Fuser system failure. Any ideas?

Yeah it looks like they call it duplex feed side one. That's what threw me off

Got it.

I found 742-5. But their is NO side 2 lead edge nvm listed on the machine sheet

Can't seem to successfully run reg setup. Can't find the right lead edge IOT nvm for msi and trays

Does anyone have the part number for this retrofit? It keeps the door cover tight. 33596

if that was a eureka bulletin I will be very disappointed with myself !!!

Thank you very much. We will give that a try today. GREATLY APPRECIATED!!

the power switch does work. Just not when it...

It's not the touchscreen. I have replaced the lvps and hvps.
The machine would goto sleep but then in the am would not turn on. So you would turn it off. But the power switch ( paddle switch on...

That makes sense. Still wish I could find the detail about what exactly b 2 key is. I didn't find a speed key though. Hopefully the 7775 is a 75 ppm. :)
thanks!!

Thanks. Hopefully it didn't effect it. I hope someone knows. Thanks anyways.