Search:

New Ricoh PCL6 drivers have a flaw. When you install a new driver, the duplex is by default enabled to print and flip on long edge. This is standard since Ricoh's xx02 series.

The solution is that...

Thanks, I will try this and give you feedback.

Many Thanks, Again.

Dear All,
I have a client who has a HP Designjet T1200 44" plotter. Now with the introduction of 72B Cartridges in Asia/Pacific region, the printer is rejecting these cartridges. I have learned from...

Dear copier tech & slimslob!
I have seen units installed with smaller HDDs which seem to work fine.
However, I will do as you suggested and give my feedback on this.
Best regards.

So I did check the HDD using a portable drive case and it was working fine. so I put this HDD which is btw of 160GB capacity, in another Ricoh Aficio MP 301SPF and it got formatted normally and...

Hi There!
I have a Ricoh MP 3054 which came to us as a trade-off. The photocopier works fine when HDD is not installed.
However, when a new HDD is installed, it takes a bit of time and prompts HDD...

Haha..... Birth Certificate....:D

hi everyone i m not gonna say anything. I want you comment on the picture here and help me understand. Its a copy made from the mentioned model.34506

Dear All!
I 'm having a little problem that i have never faced before i.e., when i try to access Web Image Monitor on my Ricoh Aficio MP4001, my browser gives me an error stated below.
Server has a...

i will check and reply with results.

my friend you have been spot on. sorry i didn't post the solution earlier. in this model you have 02 hdds of 40gb volume each. what you have to do is format them clean by using any desktop pc. two...

dear all,
we have a Ricoh Aficio 2090 that has no HDDs installed in them, hence, document server and many features like duplex and edit are not accessible. I tried to use normal HDDs (2 x 40GB) by...

Dear All...!

One of our clients happens to have a Samsung SCX-5330n Multifunctional Printer which displays an error message "Internal Error FM_fat.c 373 UIEN" while booting up. If someone faced...

dear all,
i have a Ricoh SP C431DN that is not printing at all while the HDD is connected to the controller. if i disconnect the HDD then it is printing normally. please help if anyone has solved...

Dear All,
I have a Ricoh Aficio MP C7500 in my workshop with no display on LCD or no engine run and scanner movement. it doesn't do anything except after a couple of seconds start key...

the same kind of roller is used in MP C7500, well i did clean it eventually removing the gray-ish coating, but it doesn't work any more. Clear me if i 'm wrong here, i have read the entire thread, do...

Ricoh Aficio 270 displays "Reset Photoconductor Unit" after the 24v relay on PS board trips a three or more times. Each time it trips display changes to the subject error and fluctuates back when...

replaced touch panel to solve the problem.... it seems that touch panel was malfunctioning due to moisture between layers. anyways thanx for your valuable comments....:)

thanx all for input, I appreciate your response...I have tried the hard key test and touch screen test both are ok, panel beeps too. perhaps there's a crack or dry-sold on the panel PCB. will replace...

I am currently having a strange problem with one machine i.e., Ricoh Aficio 1022 that when we enter the user code to unlock/operate the copier, sometimes it doesn't accept the entered code, but...

hi everyone,

i 'm havin a problem with the subject plotter/printer as it gives a message "Open Window and check printhead cover is properly closed,,,,,,,,,,,,,press enter to continue."

i have...

well! At the factories, these names were initially used to identify the assemblies (frames/mechanical Parts) coming in packages and were common to different product codes. This helps in simplifying...

Did anybody face problem relating ink depletion with gx 30xx printers. a message ink depleted commonly with one of the print heads occurs. any body with a solution ?

hello everybody out there!

the problem i m posting is related to Ricoh geljet series printer, the print quality issue. for the print quality its bad even when newly installed, the nozzle check is...

definately the polygon mirror motor, u know this model has a common problom for the polygon motor that comes pre-installed with the machine, makes an annoying sound when runs n after some days like...