Could the model be a C7501 ?
Type: Posts; User: Meach
Could the model be a C7501 ?
Certain Lexmark models of MFP's and Printers can have an App loaded to do this. There are over 40 models that have this option.
Load the "Customer Support" app from the Virtual Solution Center....
I have not seen this particular problem. Toshiba however has started to see the problem and are suspecting that people are not waiting for the MFP to boot up all the way in 08 mode after a firmware...
C0-10814000 TLP1255 Photo Interrupter
Default user name maybe: MarkNet
It usually means the 2nd Transfer roller has no pressure. Check the 2nd transfer roller to make sure it has not popped out of position.
Don't know if you figured this out already but do this:
From the Touch Screen
Press "Menus"
scroll down to "Manage Shortcuts" and press it.
Press "Fax Shortcuts"
Select the number you want to...
128 standard 256 max
most toshiba default passwords are 123456
Same toner system. The 430 is 35ppm A4 the 431 is 40ppm A4.
431 has 80GB HDD, 512MB Type I memory, VM Card Type O, 256MBType G Memory all as Standard.
Also the 431 has the ELP-NX and new...
Here is a print out. Look at item 2
6LA95764000 Mylar
Here is a Lexmark bulletin for the 900.80 issue.
Maybe this will help
If this is a Lexmark E460: With the printer off, press and hold the Check Mark and the Right Arrow button while turning on.
Release when the Clock is displayed. The Maintenance reset is one of the...
here is the pin out. The 200L comes with a harness. You should be able to plug into standard key counter receptacle. Anyway here you go.
GSA equipment requires the machine to NOT be built/assembled in China and other restricted countries.
In Ricoh's case, they will have a secondary assembly line in an approved country and add a "G"...
D-FC55-M 6LH16883100 very pricey at more than $300
To turn it off the Time Stamp in your default file name when scanning, use service program 08-8622 set to 0.
Toshiba Europe has the drivers:
TOSHIBA TEC Imaging Systems
Interesting. Your right. The earlier brochures & advertising show 12.6 x 48" capability.
But the new brochures show 11.6 x 48" capability.
I actually called Lexmark on your behalf and they said...
The 2018d does not support Scan to Folder/SMB.
It will scan to EMAIL
This is the troubleshooting tips page that Toshiba gives us to isolate if a board, connector or sub-assembly is causing the error.
Try this reset:
Press "Function"
Press "7"
Press "Monitor" 4 times slowly
Press "*"
Then press "7"
Select LBP Fuser Reset
Press "Start or Set"
Fax should reboot.
The new 256, 356, 456, 25,35,45 ppm very similar to the previous series but have Internal Finisher Options. and EBX
The 656 & 856 very similar to the previous series but now have Color Scanning....
Yes, you can use that generic Hard Drive. But the new drive must be formatted and Firmware uploaded in order for the copier to work again.
If the copier is operational now, backup everything, then...