Both on order, will do exactly this, thanks!
Type: Posts; User: buzz
Both on order, will do exactly this, thanks!
There's a blue background only when printing color.
Ran several DV and drum refreshes. Checked DV push button locks. Color only 128K and Blk 28K
See samples
61637
Cannot seem to reset this error.
Any Xerox techs seen this?
Thanks
Did both
05-4833 cycle
08-6984 reset counter
Also installed with new empty waste container.
Still showing box full
60839
What else do I need to do to get this to reset?
Thx xcopytech
I just got rid of all my 7845i boxes, where can I download the SD file
I have a 7855i fully working, is the SD file different?
Lights on panel "nobody home"
We reseated and cleaned all contacts and terminals on Controller PWB, incl HDD
I had a similar issue on a 7855i and ended up being the HDD and new software
But...
After 30 yrs in the biz, finally want to pick one of these up for service.
What do you recommend or tried:
60385
I have 2 DLM files in the software zip
scanner file patch
and main file
do I insert both files into the ALTBOOT folder?
I'm ordering a Xerox fuser for a C8055 that is giving a Fuser System Error and Jamming at the fuser.
Question is ebay has one labeled 607K09006 for C8045/C8055. Will this work in the C8055? Are...
Anyone has a set laying around from an old trade in ? lmk
I need to format the HDD, Fat32 ok?
60023
thanks xcopy!
is Alboot procedure the manual download?
7855 showing only the above 073 software version, for the ALTBOOT procedure, Automatic or Manual?
cheers
do you all clean and perhaps scrub the charge rollers and if so, what do you clean/scrub them with, ... scotch brite, paper towel, windex, dish soap...or no don't touch it?
jes curious.
xerox tech help please:
I recently inherited a 7855i old copier WITHOUT a hard disk. Trying to get it running for a non-profit i believe in, so i'm willing to put some tech time in it.
s/w...
OEM brand spankin' new fuser, might have had it on the shelf for a while so probably can't warranty it :(
Paper is stored in the cassette tray, and Office shelf, nothing out of the ordinary like...
Paper wrapping around fuser roller more frequent than before. Only 170K total on meter. Replaced fuser and still wrapping occurs. Firmware updated. Ran DV refresh, and cleaned machine. Looking to...
I think I.T. may have changed it and now can't use default to log in. What maintenance mode will reset the Admin Log in? is it U021?
Thansk
perhaps odd sized paper jobs being sent to the printer?
Looks like you may have found the suspect
client pcs are windows or macs, we're having printing issues with macs on a network
Customer Macs are printing jobs twice even though only one job was sent, (can see 2 jobs in the Job Status on the copier queue).
-Happening on both Sharp copiers MX4070n
-Updated Copier Firmware...
30 yrs in the business, .0009 yrs servicing xerox, lol.
Customer has two C70 copiers. Both are jamming when duplexing, maybe 1 out of 10 pages. I told them to turn the paper orientation from...
Thanks to all the feedback! All good stuff.
I concluded that there needs to be a solid and concrete reason to update, this may be at the set up for some, or later on when you see fit for others....
What determines your service department to initiate a fw update? Do you do it to all devices, all brands?
Also, if a machine was running fine mechanically for years, no issues, would you still...
I had this exact same problem. I replaced transfer belt, the little transfer connect PCB located in the front, and HV PCB.
You may have already checked this but thought I mention anyway.
...
Scanning to email with customers' 365 smtp settings and credentials does not go through. Its been working for a week and then slowly the emails stopped working all together. It just sits in the...