thanks for the link. I have win10 and smb 1.0 working at 500+ customers. The updates that are killing the scanning must be recent because this is the first time I have not been able to resolve an...
Type: Posts; User: richmods
thanks for the link. I have win10 and smb 1.0 working at 500+ customers. The updates that are killing the scanning must be recent because this is the first time I have not been able to resolve an...
I see you still don't have anything to add...
I've setup 100s of these and if you read my post I have already covered the basics and them some.
WIN10
SMB 1.0 and on1y 1 user
I have a Bizhub 368 installed in a Law office with 1 user. SMB scanning stopped working out of the blue and gives an error code of 16714711, so I went in and checked that the ethernet adapter was...
Thank you for this...worked perfectly.
thanks for the info...I just read this in another thread...will give it a try when I return.
thanks for the reply...I've checked paper settings against paper being used but I have not done any calibrations on the bypass itself so I will give that a try tomorrow.
I don't usually ask many questions here but when I do, someone always provides some good info. I have a bizhub C454 that is producing a 99-01 misfeed code on every single job fro the bypass tray. ...
Yes
thanks for the info...turned out to be corrupt firmware. Downloaded a fresh copy and it finished in 10 min. Everything seems to be fine now.
that's what I thought...any idea why this is taking so long...now at 2hrs The ADF and Scanner loaded fine but is hung up on printer and MFP.
Firmware did not fix this issue for the bizhub 363. According to what I am being told, there are no plans to provide firmware for this machine to address this. From what I have read, only the 8th...
Good idea...I actually do have that enabled.
I have NTLMv1 and v2 enabled on the copier....the IT people have disabled it on the user end.
Upgrading FW on Monday..I'll update you all after I do that.
it may come to that...thanks for the response.
I installed a pre-leased bizhub 363 last week for a customer and had an issue getting one of the PCs to scan to a folder. I've installed this 100s of times and have double checked all of my...
are you sure you set the time zone correctly? skipping this step will cause lines.
that looks like the hot roller in the fuser failing to me.
I have some MFX2850s in the field that do something similar. I can usually print from a PC, MFP console, and copy from the Platen glass and get good quality but copying from the ADF is very light. ...
This above and also make sure the ethernet adapter is set to private and NOT public.
I had this the other day on a DF-624. It was the sensor that recognized if the door (middle cover) was open. The sensor had become unseated (as one of the other posters alluded to) and did not line...
I found this a few days ago searching for an answer to a different problem but may be relevant to your case. I assume this is an FS-534 finisher?
...
I have about 30 of the C353s out in the field still and my experience has been that once the tape starts to come off the edge its time to replace the transfer belt. Have you checked your drums...
What browser are you using? I would suggest either IE or Firefox and you may have to set the compatibility view on IE in order for it to work.
With that said, the only time I could not access a...
have one on the way...actually had a lamp in the shop but it was broken as well. I don't have many of these in the field so I don't carry many spare parts for this model.
I was wondering if anyone has had any luck finding the heat lamp for this model fuser. I currently have one with a busted element and would like to order just the lamp as the rest of the fuser is...