No worries. Good luck with it. In Aus we have to fit an additional memory. Must be something to do with all the sunshine we get here. By the way, how the weather there in good old London town. Was...
Type: Posts; User: candoo
No worries. Good luck with it. In Aus we have to fit an additional memory. Must be something to do with all the sunshine we get here. By the way, how the weather there in good old London town. Was...
You will need to install and additional memory to Main Controller 2. EXPAND512MBTypeD is required when using PS Kit
Also the drive unit in the rear of the machine that drives all those gears/rollers will get gummy and cause that jam code. It means stripping out the rear of the machine to get to but it's worth it.
Had this problem yesterday. This fixed it for me.
Jamming * Paper Feed * A3 Size Paper is Wavy on the Last Two Inches of the Copy : iR4570 Series / iR3045 Series
Try removing the torque limiters on the separation rollers. Once the torque limiter is removed fit the sep roller back on. I've found this works well on this range of machines. The sep roller isn't...
If its an auto grad you want there is a tool that can be used. Its called CC-100 Gradation Adjust Tool. It may be available from the Canon website. This supposedly allows you to do an auto grad...
Hi everyone and thanks for all your valuable input. Well.... it turns out it was the upper fuser roller and gears. When I looked at the machine previously I noticed the fuser roller was very...
When you fit the buffer pass unit I think you may have to remove a paper full sensor arm for the internal delivery tray. It would be where the paper would normally output to if you didnt have the...
I have an iR5570 intermittently throwing jam code 0210. This only happens with face down delivery. The paper goes down into the duplex but when it's supposed to feed back out there is a click sound...
Yeah, just begining to go through the process. Waiting to see some reports and plans for the future. Are you already on and if so, hows it going?
I agree with the scanner motor theory. I've had the same thing. If you watch the scan lamp under the doc feeder you will see it doesnt return properly and will begin the scan from a new location down...
You could try removing the transfer belt and cleaning all the drive rollers in the ITB assy. If the belt is slipping you will get this error. Also, ensure all earth tabs are making good contact,...
Yeah, sorry bout that. Possibly jumped in a little too quickly. Does sound like a fixing film assy is needed.
You may be able to get away with just doing an error reset. Service mode, Copier, Funtion, Clear, Error. Then reboot machine and presto.
Very often E000 is due to a sudden power outage. Possibly...