montana,
I could use the L100-120 service and parts manual. Who knows maybe I could gleam info from them to help with the L170. When I get a copy of the L170 manual, I will send you a copy for...
Type: Posts; User: dcycle
montana,
I could use the L100-120 service and parts manual. Who knows maybe I could gleam info from them to help with the L170. When I get a copy of the L170 manual, I will send you a copy for...
karta,
Please elaborate on the code your see. Need the code you see on the LED. Does it start with E? There are alot of error codes that start with 'E' followed by three other numbers. Like a...
kuby:
I certainly will. I will help people because that is the way I was raised - the old way to respect everyone and everything.
David
I have the service manual. Let me know where I can send it.
Look on page 9-35 for the explanation of the error code.
David
I could use the part and service manuals for the L170. I have two (2) customers that have these machines and I have managed to correct the problems so far. I know my luck that something will happen...
FIX - Replaced the Laser Assembly.
Thanks to everyone for their input.
David
blackcat4866 - Thank you for your input!!
David
ZOOTECH - Thank you for your information. I thought it would be the motor but wanted other ideas.
David
I know it is in the polygon motor area. I want to know if anyone else has had this code and what was the fix.
Thank you for your help!!!
David
:):)This add to everyone's knowledge.:):)
David
The machine was finally fixed. The problem was when a person who usually doesn't replace the toner cartridge by opening the door too hard and with gusto that activates the sensor that tells the...
I installed a new drum & Toner drum units! It still has the same indication. I will check the other items you sent. Thanks,:):)
David
I have read the manual and I have yet to find HOW the machine knows it is time to change to a new drum! I have looked at the drum unit and re-read the manual and I still don't know how. Can anyone...
That was not the case. The sensor is intact. After talking with customer again, they had tried to 'force' the drum cartridge in and something snapped they thought. Nothing like pis___g in the wind...
The machine keeps indicating "Check toner & drum cartridge". I have tried different drums and toner cartridges. Still keeps indicating the same thing. Any suggestions? I don't have the manuals on...
xcopytech,
I could use a copy of the DC 220/230 SM. My copy of the DC420 is corrupted.
Thanks in advance,
David :):)
dcycle@hotmail.com
Anyone have a fix? I don't know just exactly what is going on because they just called and I have never seen this machine. Any help would be greatly appreciated.
Thanks before hand,
David...
Where in the hell did they get her???? :eek: It's a good thing I understood the question because I sure wouldn't get the question from her answer!! Talk about the dumb blonde. What is the smallest...
Send me your email address and I will send you 5 or 6 manuals on the machine. You will have to give a try. I will send them by "yousendit.com"
David
dcycle@hotmail.com:)
Try the following: https://www.partsdrop.com/store/
They specialize in Xerox parts new & used.
David
dcycle@hotmail.com:)
Try the following: https://www.partsdrop.com/store/
They specialize in Xerox new & use parts.
David
dcycle@hotmail.com:)
Try the address: https://www.partsdrop.com/store/
They specialize in Xerox parts new and used.
David
dcycle@hotmail.com:)
The part you want can be found at Feedroller: hp feed rollers, printer parts, hp rollers , feed roller repair kits, feed roller parts, laser jet rollers, separation rollers, hp feed rollers, pick up...
jquimze15:
I have the parts & service manuals on the Toshiba eStudio 310c Do you still need them and give me an address to send them to.
David
dcycle#hotmail.com
I guess I'm a tech. I have been fixing???? printers, faxes, copiers for 15 plus years and very soon will quit. Maybe by years end or before. I still want to take a 2 pound hammer and nothing else...