I’ve managed to find the error code :
E029 0003 05 : ITB light intensity error
Description: The reflected value from ITB was lower than the lower limit when adjusting the light intensity...
Type: Posts; User: fotocom
I’ve managed to find the error code :
E029 0003 05 : ITB light intensity error
Description: The reflected value from ITB was lower than the lower limit when adjusting the light intensity...
Hi All,
Any help greatly appreciated.
Canon C5235i Error code E000029-0003
I am a Ricoh tech but filling in for a guy today that has canons onsite.
Any pointers ?:confused:
Hi all,
can anybody tell me what the Web Image Monitor Login Name and Password is for a Ricoh MP C3503.
I thought it used to be admin admin.
Hi ,
When users print to Canon MFP's on a particular site all print jobs are defaulted to secured print.
All users just go to the machine input the password and print their documnet, it works a...
Hi we have recentley migrated to a Maximo 7.5 system in our workshop. We previously used a guage insight system (a Calibration Software Package).
We were able to print labels for our calibrated...
I will check that tomorrow. Now that you mention it those side doors can give trouble, (the thread for the screw breaks and the door drops). I wonder could that be the issue?
One more point when i replaced the PCU's the machine went through its normal initialisation.
I then carried out a full Auto gradiation adjust.
Have I missed something ?
Hi,
I have a colour registration issue on a Canon IRC3580i.
As a result print quality is very poor.
In particular it seems to be on the magenta and Cyan pcu's.
I have changed these out.
The...
Thanks so much teckat. You and absolute star.
For an extra bonus point I have another secure print issue.
I added another post ...
Hi all,
I have an IRC 2230i with a printing issue from excel.
When the user prints an excel workbook (7 colour pages in total) using secure print mode the document prints th first page out in...
Can the MFP's print screen default be changed from time and job name to time and user name.
This would avoid confusion for end users, when printing using the secure print mode.
I hope the...
Apologies I forgot to attach image.
"I have a Canon C2230i I look after and all jobs are sent to it secure print.
If you look at the attached image of the screen, it might help with the...
I have a Canon C2230i I look after and all jobs are sent to it secure print.
If you look at the attached image of the screen, it might help with the explanation of my question.
Can I change the...
Hi,
As an update, I managed to download a manual.
The error code seems to be a power supply unit.
Hopefully that should fix it.
Hi all,
I am trying to get to the bottom of a error code on a Samsung ML-4551ND.
On switch on the machine briefley goes into system initializing mode then errors
'NICBridge_IF_Ope
2983...
Turned out to be poor connection on PS12. Hopefully problem solved.
Any ideas of this error guys. Have visually inspected the area. Transfer unit is new.
Bit Stuck.
Thanks teckat,
carried out Board Cleaning/Adjustment , the area around the boards was full of dust.
Gave the area a blow out. Checked and reseated the boards. Problem resolved.
Thanks again,...
Apologies its the E 747 code.
Thanks
Hi ,
I have a Canon MFP with the following error E749 its an IRC 3380i.
The manual describes the fault as follows: E747
E747 Main controller PCB error (Image processing ASIC or memory...
Thanks Blackcat...will start swapping tomorrow.
No the new fuser is fine.
Looking at the maual it references, the following Boards: Main PBA, SMPS, Fuser Control board and HVPS board.
:confused:
I have a Samsung 770ND colour printer, with an error on the screen warming up, (for over an hour).
I replaced the fuser unit , but still have the same error.
Any suggestions greatley apreciated.
Greetings all,
I am looking for the default "Administrator Password", for NetspotConsole, so as to change a setting.
Many Thanks.
Is it possible to edit the address book from the Web interface?
Or do I have to edit from the machine.
I just want to cahange a folder path...
Thanks