Many Thanks, didn't have the manual.
Type: Posts; User: Ingersoll
Many Thanks, didn't have the manual.
Do you have the instructions to remove those?
P/N for the clutch Blk Dev Clutch CL6? The Parts Manual does not list it, only as a part of the the A0ED-R704-00 Main Drive Assy.
Thanks
Do you happen to have a p/n for the clutch? I am not seeing it in the parts guide, Just clutches for the paper drive.
Thanks
I have a KM bizhub C360 with the black fading in and out. Will print 100s of pages fine then just fades out to blank pages, and then black will return like normal.
I have replaced the black...
Yes, but no instructions in the box, no instructions in the Service Manual or Service Guide AND it can be done from the bypass tray on the new iR-A 5500i series, so technically you don't even need...
I installed a Tab Attachment Kit-F1 on a Canon iR-Adv 5535i [which came with 0 instructions] and can't get the PC and the copier to agree on printing. If you set the paper in the tray to Tabbed Paper...
TT-051915_3 Copies good Prints faded, this Tech Tip addresses this problem, it worked for me on other machines besides those listed.
I've used it twice when nothing else seems to work and it fixed the issues.
Your experience may vary.
Sharp Tech Support told me about Technical Tip TT_051915_3 which is for the MX-2615N/2616N/3115N/3116N series but has the same symptoms of copies are fine but prints are faded. Run 67-31 to reset and...
I don't understand why the copies are really good BUT prints from PCs or prints from USB are very faded. Has anyone seen something like this?
I started working on HP [Accredited Platform Specialist APS LaserJet], from there I trained on Canon, then Kyocera, then Sharp. But I work on anything I can get a manual for, Paper Shredders, Paper...
Started learning on HPs, trained and certified on Canon, Kyocera, Sharp, Muratec and Oki-data. Also have CompTIA A+, CompTIA Network+ and CompTIA PDI+, certified HP (APS) Accredited Platform...
Has anyone ran across excessive L4-16 errors mostly on MX-C311 copiers?
We have tried new Sensors, new Solenoids, new Pressure Release Drive Levers, new rebuild kits, Even new fusers - but some...
No Problem, I usually check copytechnet for folks that have had similiar issues, and google helps sometimes.
Thanks, I did those things before my posting. SOP (Standard Operating Procedures).
I have been doing copiers 15 years, HP Printers/MFPs 20 years.
I have had conversations with Paul, he's a good sort. Just doing his job. I wish I had thought of it first B-)
Part number is 302H993040 PARTS ISU ASSY
What did you do to fix the issue? I have not been able to get around this message: "Program File to SLOT0 NAND" on power on.
Our office is full up right now with techs. But you can always submit a resume :
Valley Business Machines - Wasilla Alaska
Had similar problems with a HP LJ P4515x Model CB516A, after the firmware upgrade got the message "Checking Paper Path", after researching and updating the firmware w/o the accessories, I got the...
Would you happen to have the same PM info for a Toshiba e-studio 556-656-756-856?
Thanks
Any pictures that show what you snipped off?
Yes the Op Guide says this but does not list any codes
Pg 5-111 of Op Guide
FAIL xx (xxxx) The transaction failed due to a communication error.
First 2 digits of communication error number:...
MX-M314N w/ MX-FX11 fax
Customer reports a fax receive error of FAIL05 and FAIL07 but I cannot find any information in the service manual which describes this code. Google searching on Sharp...