I would like to formly apologise for my misleading comments and would like to retract those comments.
I have asked for my post regarding this statement to be removed.
Type: Posts; User: TheOwl
I would like to formly apologise for my misleading comments and would like to retract those comments.
I have asked for my post regarding this statement to be removed.
Sir Steven, you do not need "USB Files" to format the HDD.
You need to use the service mode to format the HDD.
http://www.copytechnet.com/forums/connectivity/93967-scan-email-using-office-365-exchange-online.html
The above link will help you to create an open relay for specific IP addresses (public IP...
Windows Surface Pro all the way!!!
I use mine all the time and the good thing about Windows 8 is the Hyper-V is an installable feature allowing you to have virtual machines such as a server for...
Silly question, but why do you want to use "Email Print"?
You can enable ICS from the Windows PC and then simply setup the machine to use the IP address of the PC as the Gateway. For DNS, just use the Google public DNS servers which are 8.8.8.8 and...
If you have a Mac server, then you can publish the print queues from the Mac server so that you iPads / iOS devices can see these print queues. Basically the Mac server becomes the AirPrint server.
NetCare Device Manager won't be of any help to you as it only allows you to manage machine settings. How ever you can buy a module for PSES called Authentication Manager which would allow you to...
Sounds to me that you may need to initialize the fax and make sure that the correct regional settings for the fax are set.
Go and find a copy of the installation guide for the fax kit which has...
You will need to make sure you do a firmware upgrade on the machine as well to make it perform better.
Could be something silly like the machine not being a trusted sender or something.
Are you using the exact same email on the new machine as what was in the old machine?
When you say the...
We found that a bunch of these machines weren't saving the One-Touches when entered in from the web interface.
The fix for this is to simply format the HDD and everything should be sweet after...
Forward TX Settings is the correct function you are looking for when trying to forward incoming faxes to a folder or email destination.
The best way to set this up is to create a One-Touch...
Name the file before sending.
This should allow for scan to email without SSL / TLS and from memory, should also allow for outside domain sending.
#11 is all about the device settings to use so that the machine will speak to...
Another how to for Scan to Email using Exchange Online:
I know there have been a lot of threads about this and a lot of different ways to resolve it, but this one is working well for me so I...
Windows allows older versions of SMB to be used as standard, the biggest issue is the way the server (Windows 8 or 2012) responds to the SMB request. If it sends a response that the machine doesn't...
Terminal Strip
Terminal Block
Terminal Connector
Unless you have a specific need for connecting and disconnecting at ease, then I am with Lagonda all the way with soldering the joints and...
or
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
Use the below update to assist.
Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 update rollup: November 2013
Just a helpful post more than a question.
For those that are still experiencing issues with scanning to Windows 8.1 and Server 2012 via SMB, Microsoft released a patch which allows machines to...
I'm not the greatest Mac tech out there, so the terminology here might be a bit off.
We have previously had machines out in the field in Mac environments and the customer has simply upgraded OSX...
Try removing the printer and then stripping the driver out. If they simply went through the upgrade process, then chances are that they are still running the driver from the previous OS.
Go into web interface and make sure the following settings are setup as required:
1. Log in as the administrator
2. System Settings
3. Enter in the Administrator and machine email...
Does the server have multiple IP addresses?