Search:

Hi ,

The printer has been worked after taped sensor about 3-4 months, and then the lcd screen told that the printhead have to be changed, no way to cancel it.
I been trying to go into service...

Well, As you wish :)

give me your email address

Regards

John

Thanks

I will buy rather HP t 610 or T1100 , much better , maybe little more expensive

I been reading that the problem is with PCB, but the cost of it is too high ...:(

Thanks , but the above did'nt work. Still the same error/info - Close upper Cover''
The is no change to turn printer in service mode

Any idea?

Regards

John

Thanks for info

Well, the sensos is ok, the printer can't turn in service mode.
But , can you tell me how the sensor can be turn off in service mode?

Regards

John

2320723208232092321023211





more picture with errors before it happend :()

Hi all,

I,ve got a problem with my CANON IPF 605 ploter

When switch the printer ON, on the LCD is :

CLOSE UPPER COVER , but the cover is closed, the printer looks like dead, do nothing, zero...

So, the useing printhead untill the end did KILL the priner ,

23194

Probalby HEAD RELAY PCB is fault , but not sure.



SUGEStions welcome

Thanks.

Thants fine, you have right. But have a look for your first post below: (your reply was first)


Going backwards like you plan to do - will often fry an egg on top of the main board.

Have you...

FOR VP

Please stop your comments as your posts were useless im afraid from beginning !!! I spend a lot of time for cleaning printhead, spend a lot of ink, use mostly maintenatce Cartidge -...

Alex

how long are you or your cients or friends were able to use their printers with that modification >???? Wasn't month or a year ??

In addition,
What do you think why CANON SERVICE will remove completely posiblity of download from their websides the oldes firmware , let see ver. 1.06 ??????
Thy find it , I will buy you a...

We will see.#
The most important at the moment that printer works fine. I will let all customer know how long I will be able using this printer. I don't care that printer do PUUUFFF as some above...

Alex, IT WORKS !!!! BRAVO !!!

This is for the CANON COMPANY!!!
YOU SHOULD NOT DO FORCE YOURS CUSTOMER TO CHANGE PRINTHEAD WHICH IS NOT REALLY BROKEN OR FAIL, WE CUSTOMER SHOULD DECEIDED WHEN WE...

I've found where is head management sensor in CANON IPF 605 as the picture above indicates head managemet sensor in printer IPF 8000 which is slightly different

218752187621877

and then we need...

Do you think that is some move in youtube showing how to do this precisely ?

Hi Alex,

Thanks for reply in the case
I will try to do it of course, can you tell me that it this will resolve the problem - Message error:'' Exectute printhead cleaning, if the ptoblerm will...

That was my nozzle check scan print from SERVICE MODE - have a lock !

I've found this - this mightby interested - T17 Possibly elektrical non-ejection in any aprt than the head

Yes, please
if you can

Regards

I ve found also this

http://mail.davin.be:8888/CANON/BOOK%20IPF/IPRF600/ipf605-sm.pdf


SERVICE MANUAL FOR IPF 605 direct

There is WHOLE MAP OF SERVICE MODE FOR CANON PRINTER IPF

Canon 1692B002 Service Manual (Page 173 of 200)

I've found this - CANON SERVICE MANUAL DOCUMENTATION - over 200 pages - very interested , can be useful
Also we have all SERVICE MODE in Chapter 7 - all info about sort of any kind of canon large...