thank you for help
should i reload print driver or reboot my computer after performing previews step?
thanks again
Type: Posts; User: dohha
thank you for help
should i reload print driver or reboot my computer after performing previews step?
thanks again
l have canon lbp7750cdn printer connected to a windows 7 computer by using USB cable,
every time i try to print , i got "cannot verify" message displayed on the printer's LCD and a red light...
re:
I already checked all connectors of the fixing unit and it looks ok
I have IR Adv 6055 with E808-0004 ,if this machine powered off for a few minutes , the error code disappeared
and I can reuse it again for some hundreds of pages then the same error ,...
the jam code is 0101 delay jam at PS19, which Motor did you replaced?
thanks a lot
hi, I have canon IR Adv 6055 machine ,if the right deck FULL of paper(about 1000 sheet or more ) it would jam at pick up roller every ~ 20 copy
jam code indicate delay jam at pick up roller ,l have...
try the replacement of the UFR Heating Element.
Part number for the UFR Heating Element is FM2-3012-010.
good luck
:o:o:o
hi
I have canon ir2022 with error code E000 ,E003, I tried to clear these errors
by service mode CRAR ALL,
but I cannot ,so
how to clear E000 ,E001, or E003 on Canon ir 2o22
please help...
THANK YOU SIR,
but how can I record the laser #numbers from their top label into service mode_?
let me know please, because I replaced 2 laser units , and I did not record any #number
waiting for...
thanks for reply ,
I already did itb clean , still have same problem
thanks
I have irc3200 , it was work fine until I removed all 4 laser units to clean it from dust , after 2 days later I got color misregisteration :(
I did Auto gradation , cleaned inside ITB assembly ,and...
your problem because of the pick up solinoid became sticky , you should to clean its plate suface, and contact area of the solinoid core
o eplace it, you will find this solinoid at the rear of...