well after having my rep come in there is a very big difference between them but you will only see it when you print big difference in the blue especially to which is toshiba the machine prints a...
Type: Posts; User: simonsays
well after having my rep come in there is a very big difference between them but you will only see it when you print big difference in the blue especially to which is toshiba the machine prints a...
you should have done a 089 first thing and see what each developer looks like. this would have been the first thing to do in the troubleshooting process this is a very common problem on these machines
well lets look at you with no reputation i fore see you not even be in this business in two years i've run a successful dealership for 20 years helping our community and kids in school who can't...
hate to tell ya i love you know it all this is my intern who works on printers not copiers and he fixed it by himself no help from you thats for sure. He's only been in the field a couple of months...
very true maybe if you applied your craft you could be as good as me or reach into your pocket and pull out 5000.00 at any given time. Any time you would like to compare your skills to mine im up...
very true over the last 6 month trols have come in and have taken over
well good luck to you every thing in life aint free. and now we are jerks ? free i use to work for toshiba and ricoh. i started in 1984 i guess that makes me real old school
yes it is i just replaced one same problem i tried to adj pins with no luck changed the board and it was working immediately registered on status page and the auditing system also
Ask any of my guys if im a team player you wish you had a owner as generous as me we have a real team i dont even have to ask i have many guys that will go any distance to do the job. So keep...
funny thing is the machines already fixed not from any help from you and nothing suggested here was even close smart ass like i said before dito!!! and we are the best
Why do you think it would be the cleaning belt motor??
listen ive been here a very long time and what i'm saying is you guys aren't applying yourselves i've been doing this for over 30 years and i haven't found one of these machine that can beat me take...
This machine is making line type streaks on the front and back of the copies my thoughts are the transfer belt and roller any on have any other thoughts if you run mm 089 the lines and streaks are...
I really cant believe some of the thing you techs suggest. i cant believe your techs you guys would never make it at my place. Very rarely do i see anything you guys suggest thats even close to a...
ya there is a 6525 under legacy models
there is a 6525 also
I just had this same problem and the same idiots responding which were no help order new sensor strip it's a little 1 inch by 6 inch board if your standing in front of machine remove the left side...
If you look i edit it to say transfer roller. I make it about 1/8 to 1/4 right before the transfer roller all other t trays fee fine it's just tray #1 manual feed tray iv set the paper to the size...
WOW!! 54 views not 1 reply
I myself would remove the developer units and vacuum the tops of every scanner unit toner drops on the abd causes steaks like this any where there is toner on the top glass of the scanner it causes a...
I would think if it was in the wrong position the bottom 2 trays wouldnt feed either but they do the bottom trays work fine it just the manual feed tray tray #1
it's definitely the tray 1 and yes it hit reg fine but where the lift up plate is. It just come past the lift up plate by a 1/4 to 1/8 inch. I believe if it went 1/4 inch more it would hit the...
I didnt only because it looks pretty good and i mean it's only about a 1/8 inch from the charge roller
Ive been told by tech support when the fuser is going bad and temp drops the machine jam at reg roller every time i didnt hear about the z fold though
not a problem just pm me