Under drums R1-R4 there is cleaning shaft. Use this shaft to clean all four LEDs
If this wont help, you need to replace black dev housing. From this scan, I do not thing, that something is wrong...
Type: Posts; User: xeroxsharp
Under drums R1-R4 there is cleaning shaft. Use this shaft to clean all four LEDs
If this wont help, you need to replace black dev housing. From this scan, I do not thing, that something is wrong...
Yes it can be. Look for drum chip with PN for PH5550.
IBT belt cleaner must be changed, not only cleaned. Scan2
Scan1 - Magenta drum R3 is not ok, try to place it on location R2 or R4, but then the smudges must change colour.
Listen to Phill B
X7235, x7345, x7435, x7120, DC 250, this is the same type of toner. Make a refeel. All you need is toner chip for each colour and start printing.
Yes it is. Job for serviceman.
Change paper type. EX HW RELOAD!! / LAST NAME OF PAPER TYPE FROM BYPASS.
If this setings will not help, change paper or machine!!!
300 gsm is max., depend from producer of paper.
Fuser unit costs...
SSD will not fast you machine!!!
4-5 min. is boot up time, with fax modem 1-2 min. more.
Tested. EU 220V.
Non NVM will not fast you WC.
epson STYLUS PRO 7800 or
XEROX WC 78XX SERIES
You can use this toner type in 74xx series. Chips are available in aliexpress and ebay.
Do not use this type of toner in 75xx or 78xx series!
Thanks to Gaffers01 and wjurls .
DADF top cover has two actuators which needs to activate two sensors. Remove dadt back cover.
First actuator is not operational all the time, and it is stoping on the sensor.
You need to do some...
616 -014 write 4 and check again
What is the voltage of yellow battery on SW modul?
if the voltage is below 2.8V replace it and do altboot
OR You need to order xerox SD card for PH 7800 and perform an altboot procedure. Blank sd card from the store is not ok.
SW modul is bad.
Or base frame assy 801K42334 ( includes two hingles )
655N00524 (right hand hinge repair kit)
655N00532 (Left hand hinge repair kit)
Order this
Thanks Synthohol. My opinion is exactly the same.But I'm still interested in some other opinion.
Thanks again.
Hi all,
I am a Xerox tech and I wonder, what is the difference between DRUMS develop drum DU105 and DU106.
Thanks to all.
Regards,
Mitja
Disassembly and reassembly your 7760 again.
only transfer belt yes, transfer belt assy not.
Hi all. I am looking for NETWORK ACCOUNTING activation code for XEROX WorkCentre 5330/35. PaperCut is already running, and I need to activate network accounting on WC5335. I have some others...
Hi all. I am looking for NETWORK ACCOUNTING activation code for XEROX WorkCentre 5330/35. PaperCut is already running, and I need to activate network accounting on WC5335. I have some others...
Drum R1 or R2 or R3 or R4 is faulty.
" cat eyes "
Cleane IBT ASSY rollers