Search:

Good day,
Gentlemen is there a compatible fuser film for Lexmark MX-521ade? Fuser unit is so expensive. machine only for personal useThanks in advance for the reply.

Did you find the firmware?! If you need it, I can send it to you. What are the options and your region?

Standard firmware share to your e-mail.


53435

Isn't that the gentlemen who needs the firmware is posty07?! But okay i will share it to you.

I can share it to you just send me your gmail account.

https://publications.lexmark.com/media/sma_assets/CSCX42x_52x_62x/Fuser_Removal.mp4

4572445725

Make sure that you are using OEM toner. Remove the Toner motor and check physically if it is running thru simulation pinch the motor gear check if it can drive if the toner is attached. Check the...

Press Copy mode on the screen. and then Press "#", "*", "C" and "#". look for 24 to reset the DK maint kit.

Thanks for sharing.

Is it the same if you use the table glass? If you use ADF did you compare the original document and the copy if the size are almost the same? I encounter with some sharp machines that the copy is...

I encountered the same problem twice. No dial tone in the machine but if we put an analog phone there is a dial tone. I only connect to the machine thru the web and reset the fax setting to factory...

part number seems correct depend on your region.

43361

Thanks for the reply.

Gentlemen I need your assistance for the part number of eMMCB for KM Bizhub 658e. I cannot find it in the parts guide.


42171

What OS-are the users are using? I think MX-2614 supported up to windows 8 64bit. Correct me if I'm wrong, you said it is connected in local mode, is it connected to a single PC and shared locally?

It double the pages when you print a document. Is the second document had the same image as the first? Did it do the same in Copying?

Try to mis-feed, and check if the image on the primary transfer is OK! You said that you replace the drum unit 2 months ago...in my understanding you replace the developer a year ago, correct me if...

I think you need to test the PTC, secondary transfer or check one by one the DV unit.

I think you need to replace all the consumables... And perform color calibration.

Hi, you didn't mention what things have you've check or done! Base on your sample copy. Did you clean the main charger,glass on the laser unit by the wand. Are the developer in the developing unit...

Did you try the bypass if the copy is the same? If it is the same the next one is the PS clutch or try the MFP board.

Thanks Mr. Mike.

Guys, can you please provide below the part number of Konica minolta 283... Thanks in advance.

Drum unit
Developer
Developing unit
Transfer unit.

Okay Thanks.