Will keep that in mind, thanks.
Type: Posts; User: steve1973
Will keep that in mind, thanks.
Thanks for the input, sounds like dev unit is suspect.
Ok thanks
Used the cleaning rod but still there ,a couple more samples one with magenta and one without, definitely only magenta affected
Hi, Can anyone help with this white line fault? - low mileage machine sub 60k total.
Problem sorted, thanks to all who posted - removed Y/M/C dev units, fuser and ITB assembly, could then see much better especially through right door, drum was indeed not locating correctly so turned...
Thanks will give that a try
Yes i did release the ITB contact lever in order to remove the black PCDU, but the ITB itself was left in the machine, i have opened the right cover of the machine and opened the paper transfer unit...
This must be something obvious that i'm missing its definatly the K drum, doesn't appear to have a shaft going through it, just the 3 gears i can see.
Probably should have explained better, this machine has been put on a second floor with awkward access so had document feeder, cassette pedestal, fuser and dev units removed to aid access by...
Hi,Can anyone help with this,MPC 3003 K drum not fully inserting into machine? the other devs no problem but feeling some resistance on the K drum, and does not appear to have fully engaged?
Thanks for that, could well be machine is fitted with the fax unit.
Hi,Has anyone come across meter readings not adding up?,i'm looking at purchasing a machine where the meter for copier B&W and Printer B&W don't tally up, i think this may have been brought up in a...
Yes the web access does seem to be a bit of a gimmick ,suppose some people may find it useful? ,looking like the 9" panel is a better option, i'm really comparing chalk and cheese anyway, this...
Many thanks to all, very helpful advise.
Hi, I am considering changing my copier to a ricoh unit (mpc 4503,3003 or 2503zsp) and was wondering if the smart operations panels are any good? i had been planning on looking for a machine with the...
Thanks for that i will try swapping the display to see if that helps ,i have re-seated all of the connections on the DC Controller and checked boot rom/memory/hard disk connections, but still the...
Ok thanks, will give that a try
Not sure if anyone has come across this problem before but this machine doesn't always have the LCD display light up?,i have changed the complete panel but still the same, turning it off then on...
Had a similar problem on a canon ir3180 that was printing/copying blank pages,issue was a faulty laser unit, no error codes were produced.
Update - this problem has now been solved, the offending item was the laser scanner unit, have replaced it from a donor machine and is now working ok, no idea what was wrong with it?,all the machine...
Video quality is not great but had to reduce a lot to upload it,as you can see still on blank pages.
Here is a video to try to demonstate the beeping noise, there are two beeps one louder than the other, there at 10secs and 14secs as image is being formed (obviously ignore the last beep as its...
Checked itb through right door during mid PG10 run, nothing on itb?,apart from the smallest amount of toner, (very small amount),and still prints blank page.May be nothing to do with it but still get...
Thanks for responses, no i'm not a tech so forgive me if i get any of this wrong, would a second transfer issue prevent prints/copies (inc internal prints) from being formed on itb as i get nothing...