Looking for an nvm setting that impacts the use/enablement of the integrated finisher. I can't seem to find it in my edoc or pdf and can't get searchlite to work with edge. Does anyone know what...
Type: Posts; User: copytechman
Looking for an nvm setting that impacts the use/enablement of the integrated finisher. I can't seem to find it in my edoc or pdf and can't get searchlite to work with edge. Does anyone know what...
Ah the older gbc unit had belts that got dirty on the input side but this one uses rollers for that. Thank you for the info however.
Anyone else here have any input for me?
thanks!
A
Good afternoon knowledgeable people, I have a Konica C4070 with the G2 Punch as an option using a surelock punch die, it refuses to punch straight and true over the long term, we would get a skew jam...
Interestingly the 308e series uses the PC215..... go figure..... so that didnt help!
Regards!
A.
Well damn.... tysm! Explains a lot. I hadnt gone that deep yet my bad. Thanks for all of the help! *Facepalm*
A.
I will check that but thought the 210 was for the c224 series
Regards
A.
Firmware X4, 2 different PC215's on the same device and only out of the bottom 2 trays, tried swapping boards and bits and pieces (can provide details if needed). Can't seem to determine the why of...
I will double check that too , thank you.
Regards.
A.
I have seen that before but there’s no place to enable ip v6 that I’ve seen when you turn on the dip sw to enable the fiery controller (on the main body) , it’s not quite like the non prod Km boxes...
Yes the vi-509 was installed , followed all instructions per vi kit and everything else. At least until the fiery refused to even turn on now. Go figure. Appears dead now . No nothing
Hello all!
Looking for a piece of a puzzle, of course installation instructions aren't perfect but I have a brand new Fiery installed on a new KM press 6120.
Printing works, can see the fiery...
I’ve never had a problem with any of my 4 or 4e series using Gmail as long as the app password thing is setup properly. Had to reset the gmail password on occasion and recreate the app password but...
This is a stumper , a 4052 with 16k on the clock, jams intermittently with j9901 code , no other jam codes logged , rep’d the tray components and ran a wack and it came back way after I left , having...
That would be using the standard alt_boot method correct? (as opposed to forced_altboot)
Regards!
A.
I know this is old now but setting that specific dpsw 172 to 1 worked! Function version I set to B0 first without any change.
Thanks very much!
A!
Good day everyone , I have a c1060 that says wait warming up forever, the progress bar gets all the way to the last Bar and stay there, all lamps test good, I have yet to test to the rear connectors...
Thanks! I'll have to try that out, appreciate the info!
A.
Way back when Toshibas had settings in service mode for fax attenuation and equalizer which at the time sometimes had to be adjust to deal with long dist or overseas fax, in Canada you used to be...
Found it thanks! Turns out I was given the incorrect info regarding which finisher was on the device. Appreciate the help thank you!
A.
I know its finisher problem and its a pr finisher, but that code isnt listed in the pr finisher status raps. Does anyone have any insight on what exactly this code relates to?
Regards.
A.
Thanks , it does sound like a rubbing rubber sound and I have acquired a belt to replace to try next.
Regards.
A.
How does that HP text fax thingy work? I just for giggles called the # from desk and get fax tones, but how do you get it to call you? Or do you do a manual RX when you hear the tones?
Kind...
I Just thought I'd query here because why not. I have a Altalink C8055 in the field that kind of makes a groaning or moaning noise when the ITB belt unit drives. I have isolated as far as I can by...
Thats it! The FC15/22/31/310/311 etc and so on.. You know it! I was in from the es16 till the es450 I believe (basically 2000-2007) then from a few years back till now again.
Regards!
A.
Indeed! I work on the latest models now (after being away from Toshiba since 2007), now have toshibas again (oldest are like the 2555c era devices basically, which are still way different than a...