Thanks for the advice.
Can anyone help me out?
Type: Posts; User: mik77
Thanks for the advice.
Can anyone help me out?
Hi
Does anyone have a resolution to this problem?
Thanks
Hello
you solved?
I have the same problem
I changed the synchronous clutch, the two clutches of the group taking paper, but the problem remains.
I have tried changing all the group two socket of the paper cassette and the problem is solved....
while printing from Tray 2 on the machine exits the massage, which I attach.
the problem often occurs.
I changed the rollers, clutches, sensors, without solving the problem.
thanks and best wishes...
thank you
the problem was the paper
Hello
Toner dust around the image
I post an attachment
suggestions?
thank you3507435074
Hello
C220 / C280 / c360 color Gramm 1000 IU
C220 / C280 / c360 black 1100Gramm IU
C 203 / C253 / 353 color 1590 Gramm IU
C 203 / C253 / 353 black 1590 Gramm IU
C 550 / C451 / c650 color...
printed vertically the problem occurs at the top.
printed horizontally the problem occurs in the head.
consequently can not be the yellow IU.
copy the problem does not occur.
It is like the machine had problems to process the data.
I'll try to replace laser, ram and controller MFP.
thanks for your advice
copy is used little
imaging unit yellow new
test pattern ok
It could be the laser or the ram???
excuse my English.
halftones-mode service are perfect
of a work of 10 prints, 5 or 6 the problem occurs.
As you can see from the test, the defect is in the upper part of the sheet.
Prints only...
On each working half are good and half ago the defect. Strange thing is that the mold vertically and horizontally.
The defect does is printing pdf, jpg, than from any program.
immaging units are...
well I used hot glue, but the problem remains.
I replaced the card pawer supply.
in his spare time lighthouse 'other tests on the old board; I'll let you know.
thanks for your attention
Thank you for answering.
the bobbina highlighted is a filter that serves to stabilize the voltage.
I redid the welds, the capacitors are good, but the noise is always there.
However despite the...
Hello
I have a bizhub C451 that has the following problem:
you hear a noise on the power supply board pawer
I think that comes from bobbina I highlighted on the photo.
I can only find that...
the problem is on the plate of baypass?
sorry
thanks for the reply.
from what you're saying, do you think is the dish that makes food more than one sheet at a time?
sorry for my English
hello
when the client printing on the bizhub 200/250 gm pulls multiple sheets from the bay pass tray.
all the rollers have been replaced.
expect your news
thank you
hello
I have a panasonic dp 8020e.
when launching a print, the machine does not print on the display and exits written -work incompleto-
a colleague of mine told me that it is the processor on...
hello
I have a panasonic dp 8020e.
when launching a print, the machine does not print on the display and exits written -work incompleto-
a colleague of mine told me that it is the processor on...
Merry Christmas
Buon Natale
problem solved.
was the transfer belt
thanks
in color print out of bamde cross cyano more dark.
I trust in you27402
hello
excuse the delay. the c200 has no fuse.
go on the counter-service-life-fusing and resets with key c