Search:

Hi Guys

Hope someone can help. We have 3 Canon IR1024if copiers all with the dreaded download standby. I have trawled the internet and it looks as though a firmware update will sort this issue....

Morning Engineers.

I have an old Canon IR1024 with download standby message which is a common fault on this model. I had this many years ago and had to send the board away for repair. The fault...

Anyone had this issue with the HP Laserjet M607 Printer.

Error code is 13.FF.FF. Unfortunately Customer does not remember the original code when it first jammed.

Definitely no paper anywhere,...

Just prints blank white page

We tried to sort this issue last year with your guys help but unable to find the fault. Machine will print all colours apart from Black. We have tried two new toners but still no joy. When a test...

Hi Guys

Tried new toner, still no black print. Shutter is open on black laser unit. No toner on dev roller. Any further ideas would be appreciated. I will start to have a go after Xmas hopefully...

Interesting possibility. Will check this out and thanks for the advice. Much appreciated

Thanks for that. Customer states that they tried a new toner which l believed (but who knows!!!). I think l will get a replacement in before l start looking further. I will also check the toner on...

Hi Guys

Got an HP CM4540 will not print black. Not drum unit. All colours print fine so suspect no voltage charge to black drum as if machine stopped part way through no toner on black drum but...

Yes. I did read about this some time ago. I spent ages going through the service codes to try to find something that would reset this but no joy. Actually managed to immobilize one machine completely...

Yes. That is the answer but it drives you mad. I have never known another machine which does the same. Shame. As the Xerox are such a great printer. Strange thing bearing in mind l had around 10...

I did wonder about trying that but thought l would put it out to you guys anyway. Hopefully it might be a small fuse which blows and resets or resistor. If not nothing much can be done.

Thanks...

Does anyone know how the Xerox Phaser 6600 printer resets the machine counter when a new fuser is installed. i.e chip, fuse etc within the fuser. I cannot find anything on the net. A lot of printer...

Hi Guys.

We sold two HP laserjet M602n Printers to a Customer one works perfectly ok the other has the following issue. I have copied the Customers email. Any ideas??

We have now done a factory...

I have a Xerox 6600dn printer which will not accept a replacement toner even though it is an original Xerox. Comes up with Invalid Black. Does the same with other colours as well. It appears that ...

We have a customer with a xerox 6605dn which we supplied a few months ago refurbished. It had good original toners fitted when we supplied it. They have gone to change the toners and no matter which...

Cheers Kiran.
Run it tomorrow

Thanks Kiran

I must admit we only ran it up stand alone. I will plug pc in and see if l can get it to print so we can test
Thanks again for the info
Roger

Hi Guys

We have just intraded an HP T1200 42" plotter. Very nice condition however asking to replace print heads as out of date. Is there a way around this as a temporary measure as we need to...

Hi Guys

Got Customer with Canon IRC1225iF multifunction printer/copier. This is there third machine. Other two have been exchanged by Canon. Each machine has the same fault. When scanning or...

If u can help would b appreciated. Is it a reset procedure you can reply to in this thread or is it the reset chip and where it can b obtained.
Thanks again

Afraid not. Machine just sitting on shelf gathering dust!!

Yes Yes. Of course. Should have thought of that. Many thanks for the help. Will set it next time l see him

Hi Guys

Is it possible to adjust the density on MP2000. I have an "OLD" Customer who loves his machine but struggles using the manual adjust. He copies loads of newspaper clippings and it is too...

Hi Guys

Can anyone help with a part for Lexmark C792 colour laser printer. We have one in stock which is in perfect condition but is asking for fuser to be replaced neven though it is in good...