thanks for your fast replay, but i can't get the point is it driver issue ?
Type: Posts; User: Raoufselwaness
thanks for your fast replay, but i can't get the point is it driver issue ?
hi teckat:
do you have any updates for windows 10 because my customer was working with win7 and i was able to set send easily. but since he updated to win 10 last month i could not set the send...
Hi all;
i have replaced the dc controller 10 days ago and every thing works fine,
copying printing from the four paper cassette are fine.
thanks for all of you
Hi all
I'm so sorry not to com back and tell the results
this is because its holy week ,Easter and spring festival in Egypt.
so; i have checked every comment from your replay and asked for...
thanks zoraldinho;
i have already done that unfortunately the fault pops up !
thanks canuck;
but it not always black it my work all day fine and suddenly print this black copy with words appear like sample
and some times it print faint copy and start to print fine again ??...
thanks for your prompt replay
the sample is test #1 (print)> the fault happens during print and copy
the toner is OEM
drum life is 2.5 mil
i have cleaned all charging corona and stretched new...
I have posted new thread
Can you help?
hi friends
I have issue with ir7105 gives random black copy while working and if paper jam happens it starts working normally after releasing jammed paper .I have replaced the main charging unit...
did you receive any thing or download?
thanks for your replay
BUT Canon says it is the same M/C even service manual says that
Hi teckat;
I have issue with ir7105 gives black copy while working and if paper jam happens tit start working normally after releasing jammed paper .I have replaced the main charging unit from...
hi;
i have ir7105 at customer site, soddenly stopped printing, but i can ping it from any pc on network
also i can scan to any pc on network.
tried to reinstall the driver but no good
i used UFR...
hi dear;
i have ir7105 installed on customer site it was working like charm
and one day it can not print>
i can ping the machine from pc and ping the pc from machine
the printer driver UFRII can...
dear mojorolla;
how to calibrate the color properly for MX-6201/7001
thanks in advance
Hi dear all;
can any one tell me the differences in sim-88
i got a sharp mx-7001n with color problems and the last tech change almost every thing!
i want to reset the m/c to factory defaults;...
If you use a KATUN toner it will be good as original.
thank you very much for your continuous support
and for your gift, it solved the error.
raouf
Check PS8 clean or replace
feed us back
dear teckat
I have an error in finisher V1 57a-8001
how to adjust paper edge area sensor or paper edge stopper shift motor
dear mramlawi
1.when replacing the upper fuser roller, did you assemble it with the correct way
like tech. bulletin described?
2.teckat has a good point check it
and feed us back
dear mramlawi :
check this documents for the correct fuser roller installation
34805
also check the bias terminal, rear of fixing unit heater holder
Hi teckat;
i have the same Error 840-0001 and the Frame side connector assembly (FM2-5091-000)
was broken due to paper jam in front of the connector, i have to use epoxy to operate the unit until...
I would like to thank you for your support in copytechnet
Raouf
Yes tinnyiay is correct DO NOT use the blower