The c5030 service manual states that the Patch Sensor Value: Copier > Display > Dens > Level 2 > P-LED-DA should be 3f or higher. The service manual appears to be wrong. I thought I might have a bad...
Type: Posts; User: mikejose
The c5030 service manual states that the Patch Sensor Value: Copier > Display > Dens > Level 2 > P-LED-DA should be 3f or higher. The service manual appears to be wrong. I thought I might have a bad...
Here is a photo of the brand of generic toner that has caused problems like ghosting, high waste container usage and E020 errors on our Canon c5030's. 24897
Sorry it's taken me a while to update you on the problem with this IRA c5030. First, I have not yet changed the patch sensor assy and the machine seems to be settling down so I may not need to change...
One of the Canon IRA c5030's we service has to be power cycled frequently because it will not print. Sometimes it will display a message to call the service rep. Error log sometimes shows E020-001x...
After installing a new (slightly used) black drum I encountered this error during initialization: E020-0014.
How do I determine the correct value for the existing patch sensor?
Thanks,
Mike
Thanks! I have a black drum on hand. I'll need to order the patch sensor so the part number is greatly appreciated.
I have a c5030 that intermittently refuses to print. The display panel indicates "Check the printer. Call service representative."
The error log shows several occurrences of the following error:...
Switching to genuine Canon black toner seems to have fixed the problem. After installing the canon cartridge I ran about 40 copies with large black areas to purge most of the generic toner from the...
We're going to switch to OEM black toner this morning. I plan to change the toner, run a bunch of solid black pages to purge the system of some of the generic toner and then check for improvement....
I have two IRAc5030's that are producing ghost images (i.e. a faint image from the previous page appears). Only black is affected, the colors are fine. Replacing the black drum assembly (Genuine...
I have 2 IRA c5030's that are ghosting, but only on black. No signs of ghosting from any of the colors. The customer has been using a 3rd party toner which I suspect is causing this problem. One...
If both breakers are on the same AC power phase, then it shouldn't be a problem. Most residential wiring is single phase so you should be okay.
Sounds like it could be a bad photointerrupter on one of the doors. I had a similar problem on an IRA c5030.
Welcome. I' may need your help some day as I have a handful of MP4000 and 5000 machines.
I've been using a pair of Trendnet units for a couple of years. They work great. Both units are plugged into regular duplex outlets about 100 feet apart. At one time I had a 3rd unit in another room...
I'm no expert on Canon machines so I suggest you follow the advice of tekcat.
The Canon SST is a very limited piece of software. It's not a diagnostic tool so it won’t help you fix a broken machine. It’s only functions are installing software/firmware updates and data backup &...
I'll send you 4.72Ek. It's the only one I have.
Indeed, it was the HVPS. Thanks!
The grounds appear to be okay, spring tension is normal. The hv power supply hasn't been touched.
I have a p4015 that prints the top of the page with a lot of black background for about the first 3 inches and the remainder of the page print goes solid black. Replacing the toner cartridge with a...
I already have the manual. I'm just looking for the reset script, which may be on the service cd.
I've heard that there is a script that can force the phaser 7500 to reset the life count for an image drum (like the fuser reset script I had to use recently). If anyone has it I'd sure like a copy....
The best way to update firmware is by using the built-in update tool in the machine. That way you get the very latest updates. Check the manual for your model (if you have it).
Go into service...