After the ink charge was made from the machine technician mode, the new ink was aired and installed, and the ink was spread to the head.
Type: Posts; User: usta
After the ink charge was made from the machine technician mode, the new ink was aired and installed, and the ink was spread to the head.
board change
[QUOTE=cdvidaceiba;2109858] merhaba 5710'da da aynı sorun
var Bu bileşenleri zaten inceledim, makine bazen sorunsuz başlıyor ancak bir süre sonra hata geri dönüyor, üretici bir bellenim...
change printer driver.
We found that the problem was solved when the developer unit changed the magnet, we had the same problem before.
When the machine is turned on, error code 100016 appears. The browser section has been changed. main board has been replaced. These parts, which we thought were defective, were tried on another...
EPSON WF-C 5790 model renkli makine çalışırken 100016 kod arızası veriyor. Tarama hatası olarak görünen kod için tarama birimi kmple olarak değiştirilmiştir. Arızanın devam etmesi üzerine ana kart...
The actuator of the paper present-without sensor may have been skewed. is approving at a shorter distance than it should be. Check their angles. we met on a machine.
[QUOTE = solorajder; 1357467] Birkaç ay önce bu modelde simüler bir sorun yaşadım. İlk önce bir dubleks pıhtı temizlerim ama bu yardımcı olmaz.
Sonra arka kapıdaki dubleks giriş kağıt sensörünün...
In the paper-paper shooting mode of the mpc 2004 copier, the upper roll of the oven is constantly deformed in 15-20,000 copies. anybody have a suggestion? thank you
b223 4529
b223 4514
b223 4535
replace the roller gears for turning the belts at the edges of the duplex.
I ran into one or two machines. We changed the drum and it's all right. One try is useful
EXACTLY TYPE 28
[QUOTE = stat; 789759] Bir priport üzerinde çalıştığımdan beri uzun zaman geçti, ancak tambur tahrik dişlisinde zamanla gevşeten
ve baskının hafifçe dolaşmasına neden olan bir ayar vidası olduğunu...
Although there is yellow toner in the machine many times, the machine drops to the yellow toner no warning. Also, the yellow toner remains in the bottle too much and cannot be used. This toner can be...
I didn't come across a common parts list.
it is true that the yellow toner in these models is problematic. I recommend having a spare chip.
electronic cards and software ricoh. spare parts kyocera. chip differences.
tire set same. You can use
I use it. I did not encounter too many problems. An average of 80,000 copies. Advice. Especially in rented machines.
What fault did you get when you got 26,000 copies?
Why did you feel the need to make a tds adjustment?
Did the machine make light color copies?
Was the machine doing toner dusting?
How it is made
The EEPROM on the BCU was changed and the problem was resolved.