Thanks
Type: Posts; User: Mev
Thanks
Hi. I got a Xerox 3535 from a printshop, not working. The owner reported the Xerox tech had said it needed a power supply. He promised to come fix it with a part from another machine, but never...
I have a Xerox 5765 with 1M impressions. I run a job of 32K impressions each month, and just finished the monthly job, and started another long job, when the image started fading. Now every job...
You nailed it, Exok. I had inadvertantly taken off the black bracket immediately to the right of the toner cartridge, and when I put it back, I did not put the little pin of the push spring arm into...
I did some repairs recently, replacing an Image Exit Sensor and an Ozone cartridge. I cleared an error for Toner Gauge Reading Low. But now the machine only prints blank sheets. Whether printing...
Fixed it. The output image sensor is a little lever sensor on the right of the machine. We bought a new part (130e12080) from iteminc.com
They shipped it out quick. We installed the new sensor,...
We need 2 of the retaining springs that sit behind the rubber rollers on the delivery assembly of an HP Laserjet 9000. They are small and would fit in an envelope. We were unable to find a part...
Which is "image output terminal exit sensor fault"
Fault codes:
10-126
10-126
We had a jam which was cleared by my teenager, and he ripped the page in removing it. So, I suspect that there is a bit of paper somewhere.
The screen says that we have a jam in Area 3. We go...
Well, with a couple of cold boots, including unplugging, the system came back on. We still have the original jam fault, but the system is back up. I will start another thread about the jam.
Hello. I bought a Xerox 5790 used, and it has been working happily for 2 months. A few days ago it has a serious jam, and a rookie ripped the page while removing it, much to my dismay. When it had...
You are being VERY helpful - thank you so much for writing.
I did not energize the IBT steering motor, although those both seem to be working (hums when activated and the belt had been "steered...
Yes, I reset the NVM value. The sensor detects paper when I insert it, but I haven't totally gotten it to read the home position on the belt with certainty. So possibly a sensor, but small...
I verified that the home position sensor does indeed detect paper. I have a new IBT belt, so the reflective mark is fine.
But I also see that the belt itself is not moving at all. With PWS, I...
Ok, how do you do both of these operations?
The machine continues to give fault code 042-326, which is the IBT Belt. Upon initial inspection, the belt cleaner was very dirty and the PWS called for replacement of the IBT Belt Cleaner. We...
Scott, thank you so much. The first (Forced NVM Init) did not work, but the second did! I was able to reset the counter to 0 and run the belt adjustment. It looks like there is still an error, so...
Sorry, read the wrong thing, here it is from machine information menu -- 1.231.16
10.50.0.125
6e
Without PWS connected, it gives the same result. I can enter the "6789" to get into Diagnostics, but when I press CONFIRM, the interface locks up.
A few more clues: (1) It displays a "Network...
Display shows 042-326 which is IBT belt position. I've already taken the belt out, cleaned the IBT belt cleaner, centered the belt. I need to perform the ADJ adjustment to realign the belt start...
Hi. My name is Mev. I've got a Docucolor 250 that I service myself, and an older Docucolor 12. Thank you for letting me join your forum. I print children's curriculum books with my 14-year-old son.