Please read post above yours
Type: Posts; User: Dayer
Please read post above yours
I have now had a few of these do this fault since I started this post and I've found two different solutions to fix this. The first one I increased the reselotion to 300 and the scans works. I went...
Had the same issue, fitted the fuse, updated firmware then I could reset the code in 5810-2
you can also disable the usb in sp 5075
please see the pdf file I use, as has all the drum mods with pics for mpc2000 going up to the mpc5502
I have a mp6002 jamming in the adf only when scanning a doc to a folder or scan to email. The adf works fine in copy mode or adf free run in sp. When the doc is sent the pick assy all works fine but...
Still have nightmares when 50% of my old copy base was made up of sharp AR-c260. Don't like the ricoh mpc6501 range as still to many of them on my patch and way to much time spent cleaning toner out...
Ok, sr5000 works with mp9000, would check the pins in connector going into the copier.
Normally you get hard toner building up around the spring and the customer then snaps the handle off. If you cleaned it all out and still getting issues just order a new hopper assembly.
Could be that your fiery is set up to cancel jobs with errors in it ie. wrong media type sent. I would check in the fiery settings, you can tell it to come up with a error message instead or to force...
Best thing to do if the client is still not happy and does not want to send any extra money would be to copy the file and try on a different copier but the same model. At least you can tell if the...
If they are printing via PCL6 or 5 you will never get it that close. If they has a postscript option you have some matching options in the advanced color options in the print driver settings. With...
Hi all
Been using copy tech for years and thought its about time to give a little back. I'm a walking engineer in London, have worked on most makes over the years and mainly focus on Ricoh kit...