Hello,
I've seen this happen alot, when a user is using a print driver that isn't compatible, or an HDD that is on the fritz.
Can you check and make sure that all of the users, are using a...
Type: Posts; User: Jaycat718
Hello,
I've seen this happen alot, when a user is using a print driver that isn't compatible, or an HDD that is on the fritz.
Can you check and make sure that all of the users, are using a...
I would Run a bunch if B&W internal prints to see if you get the yellow streaks. For example, print atleast 10-20 Counter pages which only use the black drum/DV. If you don't get any yellow lines,...
Make sure that the Flag for the upper limit sensor hasn't fallen off. I've had fun with those.
Have you tried Reseating the DV unit? Running a DV Stir? Cleaning, the coronas. Check the ETB, and the pcb that sits below it.
1. Before anything. When you close the deck, can you hear the deck lifting at all? Is the motor spinning? If it isnt. Check the motor in prt-check in svc. Find the motor in question which is the Deck...
You will get more Up time from the VP due to part yields. We have about 30 c800's in the field, and about 5 of those are being used for production purposes. We only see the customer for maintenance...
Excellent! We have a few in the field Pushing 1.5 million plus with no real issues. These machines are solid, as long as they are PM'ed on time.
Hey guys, can anyone help me out with the Sharp MX-M503 Parts guide, and service manual.
Thanks!
Hey guys,
If anyone can help out with the SM and PG, for the Sharp MX3640. I would be eternally grateful!
Thanks!
Check the connectors between the Reader board, and the main board. Reseat all of those connections.
This machine might need a Firmware upgrade. This "memory full" Message that you are getting; is a common issue which was corrected with a Firmware update.
You can access service mode by pressing...
Ive had a Few machines with the same issue. All of the imaging units were between 47-50%. Yield should be 80K. Job duty should be 2 pages per job. Replacing the imaging unit has fixed it every time....
I've had a couple of these. On one, Replacing the Fuser did the Trick. On the other, Replacing the Power supply did the trick. Try pulling the Fuser to see if it powers on. If not, I bet the PS is at...
You can download the Firmware from Samsung's GSPN site. Given that you have credentials to login.
Not exactly a cheat sheet but...
For Advance models:
C2000
RM1-6035-000 - P/U roller 250 cassette 1
FM3-6892-010 ADF Roller unit
C2200
FM0-3173-000- PU cassette 1
its accross the entire middle of the page. Regardless of color. I would check the ITB/cleaner, and fixing unit. I believe these models use a AIO Laser unit. I would clean the glass on the laser cover...
The Official standing with these models is, Replace, and do not rebuild. So technically, if the machine is under 3 years old, you can actually claim parts through warranty.
So things like the...
You might want to check the Harness that goes to sr8. I had an issue where scanning anything would result in an 11x17 size. No matter what size was loaded.
FM3-7567-010 - harness
WG8-5783-000-...
I've had this problems several times.
For cassette 1 it's usually the Separation pad assembly. FM4-8108-000.
I've also had an issue where the cassette wasnt lifting due to the actuator on the...
31925
8
fu5-1448-000
4
bushing
If it's less than 1,000 copies a month, i would recommend the following:
Canon C3330I
Canon C5255 (although might be a bit overkill for 1,00 pages a month)
You can buy a wireless...
Yes, the Fixing feeder frame.
Replace the Web, and Sensor. Then Pull out the engine, And clear these two counters: Counter> DRBL1> Fixweb; Counter>Misc>FIXWEB. Reset the machine with the engine pulled out, and check the...
When you say "we won't be using it that much". What is the total estimated monthly volume for the machine?
Option
Google Apps SMTP relay (recommended)
Gmail SMTP server
Restricted Gmail SMTP server
FQDN of SMTP Service
smtp-relay.gmail.com
smtp.gmail.com
aspmx.l.google.com