Search:

Thank you. Checked that for descriptions. Just curious why DRBL-1PT-BR-Y drum counter shows accurate 26% usage vs est life, but drum life, LF counter, Y-DRM-LF shows 50. What is the difference...

Thanks teckat , I see those numbers now. Then what is the LF counter?

I attached counter images from both machines Canon1 and Canon2. For example, "Canon1" Canon1-DRBL_1_2.JPG and and...

Just wanted to confirm this counter. I have two of these machines, used but recently new to me.

Level 1>COPIER>COUNTER>LF

Displays the drum life %?

I'm getting yellow streaking on one of...

Hi Guys.

I got two c5051's used. Replaced C5185's. Simple question I just can't find an answer to. Trying to figure out how to monitor the consumable levels. 5185 gave a bar with levels left...

Looking for user and service manuals for C5051. Received machine used with no documentation.

Thank you.

I'll look at the 5250 then. I was looking to see which consumables it uses. Looks like GPR-30'S. What is the significance of the last two letters? For instance, cyan 2797B003AA, I also find...

Thanks guys.

Any opinions on replacing this with a newer used C5250?. We got 4-5 years out of the used C5185, pretty good run for the used cost. We're not a high print production office.

Apologies for an end user question. But with the E000007-0211 error on this 5185, is there anything short of an expensive fixing assembly that might get this unit going for a while? I don't really...

Wow. Thanks Teckat. REG-CLR fixed it. There is still some minuscule space between the black and yellow, and the cyan and magenta if you zoom in (not a great scan) but I think it will be workable....

I have two iRC5185's and two i use for spare parts. Quite some time ago, one started having color alignment issues. It's secondary machine so we just used if for B&W until I could get to it.

I...

On last thing on the original machine that had the error code and jam, the fixing unit tests said OK! machine is working fine, just the message saying Fixing unit needs replaced. Call svc. I...

Under fixing i see 3 options NIP-CHK FX-UHP-S FX-LHP-S

Do i run all 3?

I tested it on one of my spare machines that works fine with no errors and the lhp came back NG. Rebooted and it is...

Unit is still working, no error codes, but now says at the bottom of the display "the fixing unit needs to be replaced. Call service rep".

Being that I have two spare parts machines, would it be...

Finally got back to the office. 1st thing I did was reseat all the drums/toners before turning it on. After I turned it on, it indicated a jam in the fuser. I removed that (jammed paper was laying...

Is that suggesting it could just be a drum/toner needed reseated or replaced?

I am out of town, but my office emailed me this error code. I found similar posts so I believe it's indicating the fuser. The machine was purchased used so it's quite possible the fuser is at EOL. ...

Thanks again for your help. I was able to get another used 5185 to use for spare parts. I installed a laser unit out of that one and mine is working like a charm. Thank you. Saved lots$$$ over...

I swapped cyan with yellow laser unit. The error code did travel to yellow E000110-0102 now, so a new laser unit should fix the problem. I also saw in service mode where to change the values, so...

Any way of getting those instructions for testing before I purchase a new laser unit, or do you think necessary at this point? We work on home appliances here, not copiers, but I'm sure with a...

The machine quit during a print job back in february, we have a backup and haven't used this one since then. Just trying to get it going again if economical (it was secondhand, not more than $2-3K)....

Canon ir C5185 giving this error after lcd initializes, then printer initializing, then this code appears and machine sounds like fans on high.

Thanks for your help on this code.