Search:

Working in the London W2 area with occasional calls in other areas of London and surround. Oyster card and company car supplied.

Sharp, Ricoh and Konica experience.

PM for details attaching CV....

Good shout faxman.

Can't find the bulletin on Sharps UK site. Can you post the bulletin on here?

Thanks Paul but I'm in receipt off manuals and access to Sharp technical pages.

Hi All

Currently experiencing an issue with a MX4112 which is displaying a E7-95 Printer DIMM error.

Printer DIMM has been replaced along with the MFPC PWB and fault is still showing.
...

That is the option they can follow tonerbomb but you know what customers are like!

Your spot on with your last paragraph.

I've had a query regarding the manual input button on the touch panel for inputting addresses. Can it be disabled?

Enter sp mode 5-051 and change setting, followed by #, then re power machine.

This will remove independant toner message.

Our lads drive the Ford Mondeo and the Focus both in the Titanuim trim and recently a few Hyundia's have been brought into the fleet and they too are nicely specked. All our engineers have fuel...

Check your laser unit and in particular the polygon motor.

There is a small diode on the pcb that blows and it gives you a similar issue to the one your control panel is displaying. LCD dead and...

No more Yellow 'C' 107 C

on new release models MPC 3003

Yellow 806182C

Cheers All

Got the fuse ordered and into stock

Hi all

Has anyone came across a part number from Ricoh for this quick blow fuse in the fuser which resets the SC544 error?

I've seen many work arounds on here but was just wondering if Ricoh...

I look after a good few of these machines and most are high volume. Nasty little pieces of kit.

The assembly the secondary transfer roller unit sits on warps.

All in all it's a 10 min fix.
...

Thanks for reply.

Think more laser related issue and if not I'll be looking towards the memory DIMMS on the controller.

Thanks for your reply.

I've found in the past with the Bellinis and Katanas when you get transfer wear issues the markings you get are scuff like.

Defo not that.

Laser related by the look...

How do you know I hadn't checked the drum blade, etc .....


I'm no fool! My post may have been short and sweet and forgive me for not listing all things checked and replaced.

Mooching free...

Trying to help me by making a quick buck?! What help is that?

i put the question to the forum as manuals, knowledgebase and Ricoh have no answer.

why thank you Justmanuals!

im looking for suggestions not spam!

Ive got the manuals and many more.

Do you want to buy one? $10.00

Thanks for your reply teebee.

Not the charge cleaner as its running in wrond direction.

The line is horizontal not vertical and doesn't run from lead to trail edge.

We have a Pro906 which is giving a black vertical band about an inch thick running from edge to edge.

Also there can be text in this area which will be perfectly clear and legible.

This is an...

Have Ricoh got to their "Final Solution" and given a fix on this yet?

Engineer update firmware via USB and now can't access SIM Mode. Machine won't allow emupdate or update via http in service mode.

Tried various board replacement and U2-30 appeared but as can't...

On completion of a call. Do you leave a reset(SP7-807) copy of the SMC Data in the maintenance record book or do you leave the SMC Data sheet that you printed out on arrival?

SMC Data is unique to each machine so data from another machine won't be any use to you.