Sorry to hear that didnt solve the problem. For the scan to email. I will use SMTP IP address instead of smtp name, I found that is more stable in most cases. i dont think SSL makes any differences...
Type: Posts; User: PanaTech
Sorry to hear that didnt solve the problem. For the scan to email. I will use SMTP IP address instead of smtp name, I found that is more stable in most cases. i dont think SSL makes any differences...
What I would do is to uninstall all the Panasonic software on the PC, including printer driver's and device explorer etc, then delete the Panasonic folders under C and under program files. I wont use...
it might sound stupid, but this is what i do first when I encounter this problem. get a fresh piece of paper (8.5x11) from the paper tray, then use the corner slide it between the touch panel and the...
when u uninstall the communication utility. did you DELETE the root folder? you have to do that in order to do a fresh install. another thing is that it looks like you have installed a wrong software...
if the icon is there, and the name doesn't show on the copier, i would check the anti-virus/internet security software and windows firewall. The software communicate with the machine every...
It is in bulletin TI-H21-73. I can email the bulletin if you couldn't find it.
after u set the IP on the machine. you have to restart the machine in order to get the IP setting registered on the network. Another thing is under "Printer properties," go to "Port" tab, and click...
Where are you located? I never heard of 60041 f/w. I am from N.America. I know they have couple version for different countries.
Check and see if it has extra memory too. It is on the SC board. Those will cause problem too.
FYI, the fuser mod kit part number is PJZYF2758PU
When does it start cycling? machine do "auto-adjustment" once in a while, depends on the print quality u want it to print, the higher resolution u want, the more cycling (auto-quality adjust) it...
Function + original size (under screen) + 3 (keypad)
press and hold (if u success, u will see F1 on the screen, then u press 8 -> 'set' -> '14' for drum, and '9' for developer replacement)
I would unplug the hard drive, all the memory, fax broad if it has one. pretty much all the options, i would remove all, and turn it back on, then add one option back (make sure u turn the mc off...
The DP-1510 is an older generation machine that does not have fuser web.
you might have a fuser error.
Does the screen show any error code? or does the machine work at all?
Function +Copy (below energy saving button) + 3
svc pw default is:00000000 ( 8 zeros)
I would also reset STR (2nd transfer roller), IT Belt....
They are all in F8, scroll down the menu and...
Hi. I have a new out of box bizhub 25 make dirty print out. it does it on the first couple pages n it will get lighter and lighter, when it stops, n u do another job, the dirty copies comes back, and...
If it fail, it could pop error code, but u will probably see light copies first. Those mag rollers are very durable. even if you see light copies, I would go F8-09 first w/o replacing anythings, if...
It happened to me couple times, but mostly it had sth to do with the dev unit. for some reason, there is a 2mm wide area on the mag roller not having toner on it. I normally do F8-09 to try to get...
I have seen it couple times. What I do before replacing part is F8-09 M for magenta. This will do tone density control, which it will add toner into the dev unit. It fixed a lot of my machines by...
I had similar problem before where it just delays the images. I replaced both registration clutch and pick up clutch together with the new one and fixed it. The part number is: L9EAAJ000015, ref...
Page memory is for Scanning
Sort Memory is for Copying 32mb (160MB total max w/ option memory) and 15gb from HDD for job build
fyi, fax memory is 3mb (Option 8mb) MAX 11mb, and according to...
fyi, the toner low indicator is trigger by 2 conditions (one or the other), the toner counter count, and also toner sensor. If you take the toner out and look at it on the side, there is a clear...
I think it is the switch on the left hand side of the machine. This machine has 2 power switches, one at the back by the power cord, the other is on left side of the machine above tray 1.
If the...
Have you try print from the bypass? (this will pin point the problem to the tray)
--u can test it by pulling out the paper tray, restart machine, load paper on bypass, then try to make a copy using...
Do you mean the web access??
user name: root,
password: 7 zeros, or 8 zeros