Search:

Type: Posts; User: bilyahn

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Thread: Feed Tire Kits

    by bilyahn
    Replies
    10
    Views
    1,130

    Re: Feed Tire Kits

    On the slower units under 62 PPM i use the 850RT kits.

    On the faster units I use the 850RT as the feed roller and the 1466 as the separation roller. (Get flat spots on the separation roller if you...
  2. Replies
    11
    Views
    697

    Re: MX-M565 F2-78/Firmware

    Had a problem yesterday with F2-78. Toner all over the inside. DV brush what extremely thick. Removed the DV material and the mag roller was caked with dried on toner. Cleaned the mag roller and...
  3. Replies
    6
    Views
    1,175

    Re: f2 40 in sharp mx-503

    Are you using OEM or aftermarket toner? Have had recurring issues with aftermarket toners.

    Good luck

    Bil
  4. Replies
    5
    Views
    784

    Re: sharp mx3050 jamming

    I had this happen on a 4071. jams with no jam code listed then it would code out with an H5-01 error. Replaced the POD1 sensor and all was good.

    Good luck.

    Bil
  5. Replies
    8
    Views
    2,002

    Re: Sharp BP70C55 fuser noise

    I had this recently and was scratching my head. Fairly new machine BP series. Wound up being a full piece of paper folded up and sucked into the belt unit. Fuser was hard to turn by hand which gave...
  6. Replies
    6
    Views
    707

    Re: MX-3071 Copy Scan Issue

    Had this problem on a MX-5070. After a lot of troubleshooting and boards changes (recommended by Sharp) our tech rep said try an end of lease procedure on it. Worked for us. Might want to try this...
  7. Replies
    2
    Views
    480

    Re: Sharp BP50C26 with code C1-14.

    Main charge color problem. I would first try re-seating all of your color drums. Then start troubleshooting your power supply.

    Good luck

    Bil
  8. Replies
    8
    Views
    1,753

    Re: BP-50C31 - Slow printing photos

    From other posts I've seen this may be an app problem. When this happens to me first thing I do is install latest and greatest driver (which I see you did) then change the advanced driver setting...
  9. Re: authentical fail by admin mode sharp MX-2651

    Sounds like you need to replace the HDD going by the symptoms you listed.

    Good luck

    Bil
  10. Thread: Informazione

    by bilyahn
    Replies
    2
    Views
    698

    Re: Informazione

    Are they looking for color or B/W. Also not sure what you mean by average speed?

    All of the new BP series will run this weight but not sure about 2 sided for some of the slower speeds.

    Good...
  11. Replies
    16
    Views
    1,863

    Re: MX-M7570 upper web sticking

    No unfortunately currently unable to get this board from Sharp or Hytec which I find unusual. So I did as you suggested and removed the upper web. So far there haven't been any call backs.

    Bil
  12. Replies
    30
    Views
    6,776

    Re: Co Inquiry about sharp series 4

    Sorry but Sharp no longer allows access to these codes. Not for a long time now.

    Bil
  13. Replies
    14
    Views
    10,192

    Re: MX-M5070N admin password reset? No DSK

    Happy Thanksgiving to everyone!

    Just got back from a class and if you are a sharp dealer they have made it really easy to reset the admin password. Go into your IDNC Service website then your...
  14. Replies
    7
    Views
    1,547

    Re: BP-70C31 Drum Cartridge Error

    I had this happen within a couple of days of a new install. I pulled the charge knob then pulled the drums out slightly and reseated them. Issue hasn't returned.

    Good luck

    Bil
  15. Replies
    2
    Views
    503

    Re: MX-C507F jam code 620.01A

    I last note on this call. I did update the firmware but during the process I got the 121 fuser error. I'm wondering if you can do the update without the fuser installed. I only have one of these so...
  16. Replies
    2
    Views
    503

    Re: MX-C507F jam code 620.01A

    So got it fixed. Looks like there were 2 problems. Replaced the duplex sensor and that resolved the 620 jam code. Could now copy and print 2 sided except for 1 computer would not print 2 sided in...
  17. Replies
    2
    Views
    503

    MX-C507F jam code 620.01A

    Good morning all

    I have a Sharp MX-C507F that is giving jam code 620.01A. This code is not in the Sharp manual nor does a google search find anything. Basically what is happening is whenever 2...
  18. Replies
    5
    Views
    992

    Re: MX-M7570 touch panel adjustment.

    I have had this happen on 2 7570s and the fix both times was to replace the panel assembly. Also get a lot of u9 codes with this series. I just reseat the connectors for those be careful of the...
  19. Replies
    28
    Views
    3,664

    Re: 70/71 series Developer problems

    I don't normally mess with those unless they are damaged, then I remove them.
  20. Replies
    28
    Views
    3,664

    Re: 70/71 series Developer problems

    I clean the exposed side to get all of the black off of it then run the emory cloth on the underside. Can't really sand that part just run it back and forth to clean any loose debris. I DO NOT take...
  21. Replies
    16
    Views
    1,863

    Re: MX-M7570 upper web sticking

    Interesting. I thought about doing this but I will let you know. Thanks for the information.

    Bil
  22. Replies
    28
    Views
    3,664

    Re: 70/71 series Developer problems

    I personally clean the grids with 400 grit emory cloth whenever I take the drum unit apart. Makes them last quite a bit longer and surprisingly cuts down on the arcing problem. I know this is not a...
  23. Replies
    16
    Views
    1,863

    Re: MX-M7570 upper web sticking

    I will give this a try this morning.

    Thank you
  24. Replies
    16
    Views
    1,863

    Re: MX-M7570 upper web sticking

    I looked at the drive gears but did not remove them. But I can advance the web in simulation so I think the gear is good but I will take a CLOSER LOOK.

    Thank you
  25. Replies
    16
    Views
    1,863

    Re: MX-M7570 upper web sticking

    Hi blackcat

    They do between 3 and 4K images a day so no joy there. I have adjusted the web advance but didn't help. I have ordered a PCU board. Only thing I can figure is there is something with...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4