It is not called a fax tray in user tools, but the point is, is getting the term from the Fax Firmware
Type: Posts; User: Ballas
It is not called a fax tray in user tools, but the point is, is getting the term from the Fax Firmware
Hi Oze
Yes, thanks for the input. I have also asked the tech to designate tray 2 for fax and do the latest firmware, although I have not seen any fixes for fax on the release notes. The weird...
Thanks FrohnB, for your suggestion. We have hundreds of these machines,(we still have MP6500's out there) and only senior Techs work on them. I will ask the tech to check that again, but that will...
Hi Guys
This is a brand new machine, so the issue relates to the Fax unit installed, and not dirt or wear. It also sometimes say"EMPTY THE FAX TRAY", but there is no fax tray??
Hi, have you checked your maintenance unit? There is a RTB with a new part number to resolve the issue where the K2 cap gets dislodged, also, the issue where ink spill kills the machine on a 2200...
Hi Guys
Anyone perhaps know why a MP7503 with a Fax unit installed will give the error "REDUCE PAPER IN THE TRAYS TO THE LIMIT MARK OR RESET IT CORRECTLY"?
I have never seen this on a MP6002/6503...
Hi Guys
On old Ricoh Aficio's SC401 used to be a Transfer error, but on the 240 its ID Sensor, could be dirty, could be old Dev, could be a loose grubscrew on the drrum pulley. Normally when you...
Ok,point taken, but the whole point of calling it package is to have the whole package:D. The machines that I did the package for, did have all the firmware, but with Ricoh, your comment is worth...
Why not the package, if I may ask?
Hi Copier Tech
That is exactly how I do it, and if it is a corporate client I show the IT dept it works and tell them to sort out the user's permissions.
Also just my 2 cents on firmware, I...
35908
Hope you are successfull, it does sound like a Permissions issue:o
Hi
Nope not too old.
359053590635907
35897
Hi, by now you have probably sorted the Door Open Issue, but if not, please see the attachment.
Ok, Firmware update, Put QUICK PRINT RELEASE back on the Home screen and problem GONE :cool:
Hi Davel
Yea, like I said, its not a SC Code, just a message popping up. I just trashed the QUICK PRINT RELEASE ICON and the message is gone. Customer doesnt use Lock Print, so its no issue right...
Good day all
I have a MP CW2201sp with a front panel message CANNOT CONNECT TO THE MACHINE HDD ? Anybody ever had this message, it is not a SC Error. I dont think it is unique to the MPCW, but...
Yes that is quite correct, similar to anti-condensation heaters on Ricoh machines.
Hi,
You might also want to use the tray heaters to prevent humidity, the swith is on the opposite side of the M/C on/off sw. Heaters will stay on as long as the heater sw is on.
Hi, the problem with the MPW series mashines is that customers hardly ever print the surgested monthly volume on the units, so you end up with DEV that has not reached yeild but goes off with time....
I had this aafter a media jam on a T1200, fixed it with a Cable tie, still working fine
See Attachment
Hi, there is a firmware fix for this issue. just do the latest firmware
HI kiran thanks for the info, however I still believe if I transfer all the electronics including the ID chip or PCB that is sorta part of the Engine PCA it should work, I have everything with me,...
You think? Even if the formatter and engine PCA is from the same donor Machine:(
Good day Gentlemen, I have a T770 and someone removed the Formatter(probably to use the HDD for something else:mad:). Now I have a T1200 that is being cannibalized and I took the Formatter from...