Hello people.
I have a new custmer with a Toshiba eStudio 205 and I wiil need the service and the parts manual. Can anyone send it to me?
Type: Posts; User: suckis
Hello people.
I have a new custmer with a Toshiba eStudio 205 and I wiil need the service and the parts manual. Can anyone send it to me?
Thanks tefekkür. I really needed that.
Check also the U13 code here:
http://www.copytechnet.com/forums/panasonic/6299-panasonic-1820e-u13-error.html#post15691
Check also the toner support:
http://www.copytechnet.com/forums/panasonic/6299-panasonic-1820e-u13-error.html#post15691
Try to put the ink cartridges off and switch on the machine. Put the cartridges in one by one when asked and see if one of them causes the error. If nothing happens, try to make the same with the...
Many times faced this error and most of them was the carriage belt. Also, lubricate the bar.
Read here.
It is in Greek but I believe it will help you because there are images too.
:) Thank you foro your reply tommygun.
That' s true. I remember 2 machines with the same problem but the problem solved after I disassembled - cleaned - reassembled the toner hoper unit. Both machines are still working.
I had several problems with 1520/1820s' bypasses. Most of them had to do with the bypass feed clutch (the spring inside the clutch was faulty).
I had the same problem once on a 4520. I put a sponge at the inner side of the front door so the toner bottle could be more closed to the developer unit. The machine still works after about one year.
Did you try to LPB fuser reset?
Did you try to replace the CRU?
Does ADF close fine and fits the platen glass? Maybe there is gap between ADF and platen glass and the copier thinks that ADF in not closed.
Yes. Hot roller, fingers and thermistor are included in the PM-Kit 120K Bani said.
HDIF = Hard Disk InterFace
Yes.
DQ-TUJ10K-PU is for USA, Canada, Puerto Rico, Mexico, Panama
DQ-TUJ10K-PK is for China
DQ-TU10J-PB is for all other countries.
I have SPC: SFDM_SPCAAV22500, the others are the same with yours.
I suggest you to pull out the toner supply unit and clean it very well. Sometimes I got same problems and the machine worked after the cleaning of toner supply unit.
RudyNYC is right.
J70: The Read Point Sensor does not detect paper within a predetermined time after the original starts feeding.
The Read Point Sensor is under the ADF cover. Did you check this out?
Have you got an error code to show us?
I face an E4-14 problem some time and I finaly replaced the fuser fan. The fan was working properly but I think that maybe it didn't take as many turns as it should, so the error code appeared.
I think you should replace the exit assembly like Mr Spock said.
Thank you Paul.