Maybe PC1 is broken and high-resistance?
Type: Posts; User: xscotty1990
Maybe PC1 is broken and high-resistance?
I also put some Scotch tape on the Lever of the Solenoid SD3 to make the entrance guide of the Duplex assy working better.
Helped us on two machines with this jam-code.
greetings
Exactly,
but the " bottledrivesection " has only two Motors.
Dont know if the Toner Supply Assys all identical but you can Change the whole Supply Assy very fast.
Greetings
Scotty
Hello,
i would also take a look at the toner supply Motor for BK/C. As i remind there is only one Motor for both Colors (C,BK) and two clutches ,one for Cyan one and black Toner.
So you can...
I hope you have not just pushed the "warmstart" button and nothing else. You got to do a couple of things to get
this troublereset work. Look in your other thread
Greetings
Scotty
Hi DOE,
why do you start a new thread for the same Problem?!
Under the cover you removed is a Little black button, you can only push it with a screwdriver or something.
...
Please check the three Little gears of the paper feed unit, had broken ones a month ago.
Also check if you have built it to together correctly.
Maybe you can see the paper feed unit working by...
Hi there,
there was a technical Information for bent first paper feeding unit.
I cant find it right now but will search later
greetings
Scotty
1. Stand in front of the machine, machine is on
2. Push the "warmstart" button on the right side of the machine
3. Push and hold button 4 (i think it was 4)
4. Enter Service code
5....
Hello Folks,
there is also some Kind of plate which is used as offical modification. You can screw it in front of the Image unit.
Here is the PartNo:
A00J-P331-00
Greetings
Scotty
Hello there,
do you got any Jam-Codes for us? Does ist always jam in the same Position?
Greetings
Scotty
Hi Eric,
thank you for your advice, i will take a look on monday. I just had changed the sd-Card on the board, nothing else.
By the way, i am no OKI expert.
Greetings and have a nice...
Problem solved,
The board CLQ-4 was faulty ( the four cables from the LED Heads are going to this board)
Now with a new board the machine is working great.
By the way: Is there a way to...
Hi Folks,
where can i find the LED fuse? I have searched in the area around the flat ledhead cables on the prcb board.
I think it must be a smd fuse?!
Edit: I have spoken with OKI Support, so...
Thank you Leo,
i will take a look
Hello Folks,
so i got this piece of crap here next to my computer. Only message in the Display is Fatal Error 134. I changed the led heads from black to Cyan and so, but the error code still...
Does the customer use the first tray/secondtray for plain paper and also for thick paper?
Why not using one tray only for 110gr. paper and one only for 80gr paper?
greets
Scotty
Hello fishleg,
i think the easiest way would be one driver only for thick paper called "thick paper" or something and one driver onkly for 80gr. paper. Customer has just to choose the driver.
...
Hi CrapAimer,
did you tried to update the Firmware?
Maybe it freezes because of faulty Firmware
Greetings
Scotty
Hi Folks,
i Need the Field Service Manual for this machine. Would be nice if some one could send it via E-Mail.
Private Message please ;-)
Greetings
Marco
Sensor in the fuser unit is working fine. Also the printer works fine now, had no call since April.
greetz
I have been on training for bizhubc454e for a while.
They said that the machine recogneizes the touch on the
touchpad but just doesnt beep. There must be a soundlag or something.
Just switch off...
Hi,
if you got a c284 just push the Display over to the left side then you will see the keypad:D:D
Greetings
Marco
Same process as on other bizhub models....
Paperjam went away by themselve. Dont know why but Printer works:cool: