Well, I ended up replacing both the SC and SPC boards on it, although I think the culprit was SPC PBC. I had done so many adjustments and such it could have been just coincidence, but I individually...
Type: Posts; User: Magebomba
Well, I ended up replacing both the SC and SPC boards on it, although I think the culprit was SPC PBC. I had done so many adjustments and such it could have been just coincidence, but I individually...
did you still need part?
If anyone is familiar with the Quick image navigator I have a question
Any image that is scanned from a panasonic machine shows up in the preview area of the QIN.
Now if I want to preview a PDF...
There is a mod for faulty grounding of the drum flywheel on the back of the machine. Easy way to find out is to ground the flywheel to the frame with a paperclip while making a copy and see if it...
ya they are nearly identical which points me to developer/toner creating the fuser issue. and also begs the question why there are so many different toners for all in this series. 6010 is different...
and honestly I should note that I do not have any 8060/45's in the feild with these problems and only one 8035 so should have said 3510-6030
do you work for panasonic? lol
thanks for the help though i have seen this sort of problem plus a plethora of overtoning problems with these machines. compared to the canons i work on i absolutly...
im not sure. i would hope to think i tried that before, but anythings possible. havent had it happen in over a year or so now but i always had to reseat the flag, which does in turn reset the...
ya thats the bulliten, although I have never seen the 3-10 code myself I have always had light copies, then i just ground it out to see if thats it. dang I hoped that was it >< Heres hoping you...
if i remember right there is a screw that holds the flag assembly together. just be careful and even take a quick picture before because the is a spring that holds the fl;ag down once it has been...
on the back of the drum unit there is a little flag with a quarter circle gear that it meshes with. when you install a new drum it triggers this flag and moves it so that it cannot be used as new...
Your answer is the grounding of the drum unit. Take a paperclip and screw it to the frame on the back and bent the clip so that it rides on the flywheel. there is a bulliten on this as well I will...
Please help!! From a fellow tech.--
I have a 6030 in particular that has been locking up the fuser web and making that noise that we all know well. These junk machines are killing me!
This...
cool guys thanks that helps a bunch.
Hi guys, I am new to the Toshiba Forums as I specialize in Canon.
My quesstion is what is the overall performance of this machine. I have a current customer that wants me to take it over but I...
Thanks for the quick reply!
Hey guys I am new to the xerox side of this site but I have a little 215 with an L6 error which I did some digging and found it is a polygon mirror speed issue.
My question is:
Am I wasting...
meant to say prt-chk # for motor is sometimes not the same as the actual motor # for the machine, not i/o
trg ftw!!
also remember motor #s dont always match the i/o #
also.. ctrl-f is a wonderful thing for any manuals, especially over 1000 page ones!
problem solved with an all job clear.
i had about 8 seconds from boot to enter service mode and select all job clear, took a few tries but got it.
updated firmeware afterwards for good measure...
Just posting this to see if there is known fix.. i am going out to look tomoro morning
Customer has a fax job recieving, copier recieves partial and then recycles power(shuts itself off and back...
cool thanks for the info Monty!
Panasonic CL-18 Print Cartrige reset
Is there any way to revive a down print cartridge?
We dont stock many of them because panasonics warrenty starts the day you buy it and the...
Is there any way to revive a down print cartridge?
We dont stock many of them because panasonics warrenty starts the day you buy it and the cart's are less than 50/50 of making it to its expected...
we get our sel sol from canada now 50$ per gallon