Search:

If you forgot to clear the counter before replacing of the developer then you have to open the ADU door, turn ON the machine, go to the Service mode, clear the consumables counter, run F8. Thats it....

Sorry guys , I didn't realize it it doesn't have SMTP authentification, I know it's old model.

When I set the email scanning up I do 3 main things:

1.SMTP settings ( IP adress or name of SMTP server )
Check if is SMTP authentification ON, get it from IT guys name and
password

2.I...

Hi, Have you got any latest ,,new solutions,, of biz 600,750,1050. Will be great. I had some acces to aussie site but they closed it down.
In Europe is only ,,infohub,, but it is piece of crap....

I can't believe this machines are still alive :eek:

What about copying ? Is that fine ? I mean, tried to eliminate whether is hardware issue or software issue.

Have you tried to print from another PC ?

I think the most of things what you asked are included on driver CD of brand new machine.

Yeah, I would say the same as luther. Recycle unit might be gone,full or something wrong with driving gears.

Man, Have you tried to check the hardware already ? I mean I/O mode and check the fan.

C-2401

The EM signal shows an abnormal
condition when a specified
period of time elapses after the...

I had a few issues with this message and I had to replace the board where is leading the ribbon cable from optics. Only that sorted it out.
I thought I have the issue with lamp,inverter board or...

It's old stuff so quality isn't the best.

I had the problem wit uploading. Give an e-mail I can send it to you.

I would change the developer, It's really not big deal, a few bucks.

and then run F8.

Why don't you want replace dev?

I thoght the same but I was wondering your opinions and experiences with this machine. The less machine the bigger issues,bloody machine.
I will try it on Monday, let you know what happens.

I thought the same but I couldnt see it in device manager. When I tried to connect the scanner I got the message ,,failed to connect the scanner,,

The local connection was fine I could print the...

Hi guys, can anybody help with scanning on this machine. I am not sure about that how to do.

I instalated the GDI driver which should be together with scanner driver but I still get the message:...

I absolutelly agree, plastic fantastic piece of sh*t, In my case I replaced heaps of lamps, If you have any problems with Call service messages or problem with faxing just replace the lamp.

I meant If you reset PM counter and then don't do L-detection I am sure you get F26 message.

Be sure you replaced the drum and developer then go

1.47 mode,code 91 start (clear the drum)
2.47 mode,code 90 start (clear the PM)
3. 47 mode,code 51 start( L-detection)

keep the order I...

Which sleeves ??

Unusual :-) , no I am just joking. ,,Plastic fantastic,,

The last possibility is glue it.

Next time press slowly and together with two fingers on both sides.

I am still out of question :-)
What way did you use to install the printer the same what described serginho_vl ?? or anything different ?

If you want to check settings, go to right click on...

Have you already played with settings of ports in printer driver ?

I mean, try to print through LPR port or through RAW.

If you set up RAW port you have to be sure you have the same number...

Have you got HDD on this machine ?

1.If yes, unplug it and try turn on without HDD.

2.Check all service calls on your management list, is there anything suspicious like comunication errors...

yeah, I know. I got hard roller. Customer doesn't use embossed paper I meant If customer has problems with fusing of toner There can be used setting for embossed paper with normal thick paper in the...

Guys, today I have played with temperature and I sorted it out. I increase +5 degrees and I got nice smooth fusing on thick glossy paper.

This issue can be sorted it out by choosing of embossed...