Search:

parallel,and I choose bi-centro comunication on the top of the SST window.

Yes,I try to change hard drive today,I got 3 used(tested) hard drives,and all of them are canon spare parts(one is toshiba and other two is hitachi),
but I got same error in SST.Error code is 105

I tried hd format v18,but nothing happened,i got the same error.When i get the error screen in SST,it says that error message is SWITCHING TO THE ECP MODE HAS FAILED.
CAUSE OF /ACTION FOR ERROR
...

Hi,I got an error E 602-003 on Canon IR 2800.I tried to re-install firmware,but I got an SERVICE SUPPORT TOOL ERROR -3,when I try to do the HD format.I tried to replace the HDD(about 5 different...

Does anybody knows how to turn off the red tool sign from the display on toshiba e studio 166?
Thanks

I have poor quality copied images on the machine.When I print from PC,there is no problems,but copy is very bad,weak colors and weak contrast.I did the auto gradiation,but nothing happens.Does anyone...

After changing the drum unit,machine was printed about 5.000 copies,and I got the same error-J6?Does anyone know how to reset this error?
Thanks

Thank you,I will try to clone old hard drive with installed hd format.I have a few machines so I can try anything to do.But,in one month,I have two cases to have a problem with hard drive,and I had...

I have this problem,maybe about 10-15 times,and all of them are solved in service menu-clear-all-ok!Nothing i s needed to be replaced!

Yes,I am edit inf file,but still have a problem hard disk mistmatch.Is the problem with hard drive,becouse the capacity is 160 GB?
I install this hard drive:
Specifications for the 160 GB Caviar...

I had a problem with hard drive,and I took another(a new one) to install into copy machine.But every time when I try to do the HD format from SST,it tells me that hard drive not mached with machine.I...

Thank you.I installed dN firmware,and machine is working excellent!

Yes,machine was printing from the PC over the network,before problems.I tried to ping that IP adress which machine use,and result is ok!But after instaling D firmware,it won't print.I didn't tried to...

Ok,I will try to install N firmware.Thank you very much.

No,I didnt install N firmware.But,why it won't print from PC over LPT port also?

After error code E 602-004,i was perform HD check from service menu.After that,i got an error E 602-003.Then,I did hd format and installed new system software.After that copier won't print from PC.On...

Toner light is off,no blinking or lighting.I upgraded firmware to new one from the samsung site.Did this is bad for chip crossover?
Because,i tried to turn of CN 5 switch and i put in the printer...

I have a problem with samsung ml 1640.After changing a cartidge,printer gives me an error light.I was printed test page on the printer and it tells me that the toner is invalid,but,I put an genuine...

Ok,I will see tomorrow,on my work,then I will post here.
Thanks

I don't know.I usually don't look that.But,now I have one more problem.Paper jam is on right side,on the spot almost where paper enter in unit 1.On black roller-first on right side of copier.So,i...

Upoznao sam nekog Dadu na seminaru kod nas u Bijeljini,ali se ne mogu sjetiti gdje radi.Znam da je iz Mostara i da se bavi malo i fotografisanjem.Imao sam neki problem sa fotoaparatom,pa mi je nesto...

Ma probao sam da stavim dek A3,ali isto se desava.Poludio sam skroz.Sve je ok na izgled ali nisam pametan sta je u pitanju.Ne znam da li je mozda problem u kuplungu pozadi,ostalo je jos to da...

Hi,I have problem with IR 5000 when I want to copy A4R from third deck-cassete.Paper had jammed in between separate rolers.But that is not always.Sometimes,it may pull 100 pages,then every...

I tried,but nothing happens.How can I enter into service mode.I pressed:status/counter-yes/0/stop/01/stop
Is that correct?
thanks

When I turn copier on,after a few seconds,display shows error CF032,and call service.I cleaned the drum unit and waste toner,but nothing happened.Does anyone know what is the problem and how I can to...